Solved

Dell Powerconnect 6224 + ISCSI crash the switch

Posted on 2009-05-15
2
1,457 Views
Last Modified: 2013-12-25
Hi,

I´m running a Dell Powerconnect 6224 with firmware 2.2.0.3 for a customer.
After upgrade to firmware 2.2.0.3 from the version 2.0.0.12, and starting to use ISCSI with link aggregation groups, the switch began to reboot every 2-3 days.
Now, i have disabled LAG and this issue also happen.

It could be a firmware problem? Really, with firmware 2.0.0.12 it was solid as rock but without a advanced usage such as vlan, link aggregation, IP routing...
0
Comment
Question by:admin112
2 Comments
 
LVL 32

Accepted Solution

by:
Kamran Arshad earned 500 total points
ID: 24420236
Hi,

What does the Syslog suggest? Any specific error?
0
 

Author Comment

by:admin112
ID: 25170697
FInally, downgrading to oldest version, everything works OK.
0

Featured Post

Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question