Solved

Comcast SMC8014 router to Linksys WRT160N

Posted on 2009-05-15
2
1,126 Views
Last Modified: 2012-05-07
I have obtained comcast busness class with 5 fixed ip public addresses. I connected the linksys router after the smc to control my local lan. The NAT has been disabled in the smc and the linksys is set to a fixed local ip address.10.1.10.5 with the gateway of 10.1.10.1. The first ip address is available throught the DMZ. Every thing works properly with the linksys handling the NAT and wireless routing.

I want to be able to access my NAS and terminal server which are on my local lan from a one of the addtional public IP static addresses that I have from Comcast.  I am trying to keep them on the lan so that I can access them locally as well as through the internet. How do I do that routing?
0
Comment
Question by:allpage
2 Comments
 
LVL 30

Expert Comment

by:Kerem ERSOY
ID: 24399613
What Linksys modem are you using? What do you mean by DMS? Do you have a dedicated DMZ or you're using DMZ feature of your router in that maps an internal host to one of the IPS so that It will respond to address?

What ports do your NAS and terminal server use ?

Do you really need that much of IP's?

What are all the services you have ? What ports or portranges does it require ?

If you send these info I'll try to help you.

Cheers,
K.



0
 

Accepted Solution

by:
allpage earned 0 total points
ID: 24399704
Linksys WRT160N is the linksys modem I am using. Should be DMZ of the SMC 8014 from Comcast. THis allows the second router to be mapped to the outside world with the first public static IP.

The ports are not set at this time. That I can work on that later.

Comcast sells Static IP's in blocks of 5. Will use three of those.

I mainly need the IP routing and smc setup.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question