Solved

Problems configuring PIX 501 to reset the password

Posted on 2009-05-15
7
296 Views
Last Modified: 2012-08-13
I'm following this standard procedure http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_password_recovery09186a008009478b.shtml to reset the password but I'm unable to ping the tftp server. I have 192.168.1.0/24 network. What am I doing wrong?

address 192.168.1.200
server 192.168.1.240
gateway 192.168.1.1
file np63.bin

able to ping the gateway but not the server

no firewalls in between


thanks
0
Comment
Question by:piotrmikula108
  • 4
  • 3
7 Comments
 
LVL 30

Expert Comment

by:Kerem ERSOY
ID: 24401279
Since both sere (tftp server I guess) and host (cisco) are on the same host. You're not useing your DG. So it is irrelevant for what we do. But since you can not ping the server with address .240 seems to me that it has its built in windows Firewall is there. Will you disable it and retry?

0
 
LVL 30

Expert Comment

by:Kerem ERSOY
ID: 24401280
"are on the same host" should read "are on the same subnet"

Sorry.
0
 
LVL 1

Author Comment

by:piotrmikula108
ID: 24401285
it is disabled no other firewall was installed on that XP box
0
Control application downtime with dependency maps

Visualize the interdependencies between application components better with Applications Manager's automated application discovery and dependency mapping feature. Resolve performance issues faster by quickly isolating problematic components.

 
LVL 1

Author Comment

by:piotrmikula108
ID: 24401288
output from teraterm

monitor> interface 0
0: i8255X @ PCI(bus:0 dev:17 irq:9 )
1: i8255X @ PCI(bus:0 dev:18 irq:10)

Using 0: i82557 @ PCI(bus:0 dev:17 irq:9 ), MAC: 0017.e0e3.7d1c
monitor> address 192.168.1.100
address 192.168.1.100
monitor> server 192.168.1.240
server 192.168.1.240
monitor> file np63.bin
file np63.bin
monitor>tftp
tftp np63.bin@192.168.1.240 via 192.168.1.1
TFTP failed (return:-1 arg:0x0)
0
 
LVL 1

Author Comment

by:piotrmikula108
ID: 24401291
I verified I can connect to the .240 tftp server from another machine and get the np63.bin file
0
 
LVL 1

Accepted Solution

by:
piotrmikula108 earned 0 total points
ID: 24428833
i changed the ip to lower numbers and it magically started working... go figure :-)
0
 
LVL 30

Expert Comment

by:Kerem ERSOY
ID: 24430888
what is your IP MASk? Du "upper" numbers belong to the same subnet?
0

Featured Post

Control application downtime with dependency maps

Visualize the interdependencies between application components better with Applications Manager's automated application discovery and dependency mapping feature. Resolve performance issues faster by quickly isolating problematic components.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Network traffic routing plays key role in your network, if you have single site with heavy browsing or multiple sites, replicating important application data from your Primary Default Gateway ,you have to route your other network traffic from your p…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

912 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

25 Experts available now in Live!

Get 1:1 Help Now