Solved

100Base T to Coax Adapters

Posted on 2009-05-18
2
350 Views
Last Modified: 2012-05-07
I have to extend a network to a second building for Internet access. There is no way to snake Cat 5 wire between, and there are too many obstacles to wireless. However, there is a RG 58 cable run between the two.  I have had good experience in the past converting from 10BaseT to Coax.

I don't know if any of the hardware is still around. What is currently the best way to use existing Coax? Are there dedicated adapters.

Thanks.
0
Comment
Question by:computerlarry
2 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 24413477
How far is this RG-58 cable?

You can try one of these.

http://www.web-tronics.com/rjtocoaxadki.html

0
 

Author Closing Comment

by:computerlarry
ID: 31582647
The device is quite interesting. It just takes 1 pair and transmits the signal over the Coax. I haven't looked at the specs for twisted pair in a long time, but that means that 1 pair is signal, and the other pair must be a Kirchoff's law thing (i.e. prevent interference)  Last time around I had to get hubs with 10BaseT and the original Ethernet connectors, and couple them with BNC to E-Net adapters.
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
EIGRP - redistribute without the default route 5 36
Wired Network vs Wireless 12 57
CCNA lab 6 36
Bandwidth issues? 5 30
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question