Solved

Backup Exec 12.5 Error

Posted on 2009-05-19
12
3,243 Views
Last Modified: 2013-12-01
Hi,

I am running backup exec and i get the following error:

Error category    : System ErrorsError             : e00084f4 - An unknown error has occurred.
For additional information regarding this error refer to link V-79-57344-34036

Click an error below to locate it in the job log
Backup- \\AUTONOMY\C: Storage device "DINC Backup Folder on Server Kang" reported an error on a request to write data to media.
Error reported:
An unexpected network error occurred.
V-79-57344-34036 - An unknown error has occurred.

Any idea how I can resolve this issue. It is backing up data to a server at the moment but is failing and is starting to get annoying when you cannot resolve this issue. Any help will be appreciated.

Thanks,

introlux
0
Comment
Question by:introlux
12 Comments
 
LVL 6

Expert Comment

by:Krisdeep
ID: 24420173
0
 

Author Comment

by:introlux
ID: 24421881
Its not a cache issue as mine is enabled.

Anymore ideas????
0
 
LVL 2

Expert Comment

by:DennisPost
ID: 24423074
Hi intolux,

I have the same problem :-(
I was going to update to version 12.5 to see if that would help, but I won't bother now.

A similar question was asked, but the answer was vague, so I posted a discussion comment asking for more information. Hope an answer is coming and that it resolves our problems.
http://www.experts-exchange.com/Storage/Backup_Restore/Backup_Exec/Q_23649432.html?sfQueryTermInfo=1+10+v-79-57344-34036
0
Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

 
LVL 10

Expert Comment

by:OnALearningCurve
ID: 24423841
Hi intolux,
Could it be a rights issue?

Does the user account that the BE service is running as have access to the folder you are trying to back the data up to?

If it is a Tape, has it been set to not be overwitten for a set period of time?

HTH,

Mark.
0
 

Author Comment

by:introlux
ID: 24431543
Well I have now created a new folder and redirected the backup to be saved into this folder which I know has all rights to read and write.

I will find out if there are errors 2moro.

Thanks for all the input so far. Will keep you updated.

introlux
0
 
LVL 10

Expert Comment

by:OnALearningCurve
ID: 24431924
Good Luck!

:)
0
 

Author Comment

by:introlux
ID: 24440113
Ok - Got a number of failed messages again but this time it was less but random errors. One is as follows:

Backup- \\BACKUP01.#######.local\F: Storage device "DINC Backup Folder on Server Kang" reported an error on a request to write data to media.
Error reported:
Not enough server storage is available to process this command.
V-79-57344-34036 - An unknown error has occurred.

There is space on the server but I am still getting this error.

Any idea??
0
 
LVL 10

Expert Comment

by:OnALearningCurve
ID: 24440292
OK,

A quick google search of the error message points to a number of possible solutions, all of them random and vague!

One simply recommends re-booting the server and that seemed to have resolved it for one person.  If the machine has not been bounced for a while I would suggest trying that first.

If that does not work I would suggest trying to back up a small file from the BE server to the local drive on the BE server and see if that works. If it does then its a case of step by step tests to find the problem.

Hope this helps,

Mark.

0
 

Author Comment

by:introlux
ID: 24440332
Thanks for the reply back - I will schedule a restart to happen with the server as it is used very often where it holds all the files.

As soon as this has been done I will let you know if there error happens. If so will try an example with a small file size and check if I get the same error aswell.

Will keep you posted.

Thanks,

introlux
0
 

Author Comment

by:introlux
ID: 24442995
Another error I had got is:

V-79-57344-34070 - AOFO: Initialization failure on: "\\TECHY\Shadow?Copy?Components". Advanced Open File Option used: Microsoft Volume Shadow Copy Service (VSS).
Snapshot provider error (0xE0008516): Resources specified for snapshot do not have any valid data on them. Check if files were deleted or renamed.
Check the Windows Event Viewer for details.
V-79-57344-34070 - AOFO: Initialization failure on: "\\TECHY\System?State". Advanced Open File Option used: Microsoft Volume Shadow Copy Service (VSS).
Snapshot provider error (0xE0008516): Resources specified for snapshot do not have any valid data on them. Check if files were deleted or renamed.
Check the Windows Event Viewer for details.

Is this referring to low memory???
0
 
LVL 10

Expert Comment

by:OnALearningCurve
ID: 24448510
Do you have the BE client application installed and running on the machine you are trying to back up across the network?
0
 

Accepted Solution

by:
introlux earned 0 total points
ID: 25354194
This problem has automatically fixed itself.
0

Featured Post

What is SQL Server and how does it work?

The purpose of this paper is to provide you background on SQL Server. It’s your self-study guide for learning fundamentals. It includes both the history of SQL and its technical basics. Concepts and definitions will form the solid foundation of your future DBA expertise.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

By default, Carbonite Server Backup manages your encryption key for you using Advanced Encryption Standard (AES) 128-bit encryption. If you choose to manage your private encryption key, your backups will be encrypted using AES 256-bit encryption.
A Bare Metal Image backup allows for the restore of an entire system to a similar or dissimilar hardware. They are highly useful for migrations and disaster recovery. Bare Metal Image backups support Full and Incremental backups. Differential backup…
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of configuring basic necessities in order to use the 2010 version of Data Protection Manager. These include storage, agents, and protection jobs. Launch Data Protection Manager from the deskt…

785 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question