Solved

hp proliant dl320s has drives 3-12 flashing and is locked up.

Posted on 2009-05-19
3
363 Views
Last Modified: 2012-05-07
I have a hp proliant 320s with 12 250GB SATA drives running raid5 that became unresponsive. This is running MS 2003 storage server.  I did a cold repoot and the first 2 drives flashed as if the raid array was rebuilding and the other 10 drives were solid green.  After about a half hour the first 2 drives became solid green and the last 10 are all flashing.  This has been going on for over 15 hours.  I can't get into the machine or even watch it go thru POST.  Any ideas are greatly appreciated.
0
Comment
Question by:mmcguckin
3 Comments
 
LVL 77

Expert Comment

by:arnold
ID: 24431092
Get into the RAID controller during the boot up process and see what it is reporting.
What is the state of the RAID setup?
0
 

Accepted Solution

by:
mmcguckin earned 0 total points
ID: 24434702
I found the solution myself.  The mother board went bad.  I replaced the MB, entered the SN and Procuct ID into the BIOS and the server came back.
This issue is closed by me.
0

Featured Post

Migrating Your Company's PCs

To keep pace with competitors, businesses must keep employees productive, and that means providing them with the latest technology. This document provides the tips and tricks you need to help you migrate an outdated PC fleet to new desktops, laptops, and tablets.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Lets start to have a small explanation what is VAAI(vStorage API for Array Integration ) and what are the benefits using it. VAAI is an API framework in VMware that enable some Storage tasks. It first presented in ESXi 4.1, but only after 5.x sup…
Create your own, high-performance VM backup appliance by installing NAKIVO Backup & Replication directly onto a Synology NAS!
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
With the advent of Windows 10, Microsoft is pushing a Get Windows 10 icon into the notification area (system tray) of qualifying computers. There are many reasons for wanting to remove this icon. This two-part Experts Exchange video Micro Tutorial s…

856 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question