Solved

PIX 515-E reset tunnel

Posted on 2009-05-19
1
2,949 Views
Last Modified: 2012-06-27
What is the command to reset a tunnel on a PIX 515-E,  version 6.3(3)? The clear command I tried isn't correct.
0
Comment
Question by:timbrigham
1 Comment
 
LVL 19

Accepted Solution

by:
nodisco earned 500 total points
ID: 24426629
Hey

If you show the crypto isakmp sa table you can then clear the sa you want to disconnect.  Don't clear isakmp though - it will remove the lines out of the config.

clear [crypto] isakmp sa

The clear [crypto] isakmp sa command deletes active IKE security associations. The keyword crypto is optional.

from
http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/gl.html#wp1027312

0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco 3800 series and WISM2 1 29
Configuring WAN interface on Cisco ASA5525 3 25
VLAN Question 7 32
Palo Alto site-to-site vpn monitoring 5 11
Let’s list some of the technologies that enable smooth teleworking. 
For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question