Solved

cumulative query part 2

Posted on 2009-05-20
7
166 Views
Last Modified: 2012-05-07
The following query works great for cumulative data for the 2 columns shown.  The level of complexity is as follows.  The data in the table also has a opData_Type_ID.  If the ID = 1 then the data is actual, if the ID = 2 then the data is projected.  I need to add 2 columns to the query for the projected data in the same row as the corresponding actual data.  If there is no data for that month it should return 0
SELECT 
a.opData_Year, 
a.opData_month ,
a.opData_value+ ISNULL( (SELECT SUM(ISNULL(b.opData_Value,0)) from opData_Monthly b 
where (b.opData_Year = a.opData_Year and b.opData_month < a.opData_month) and a.Opdata_Date >=@StartDate and a.opData_Date <=@EndDate and b.Opdata_Date >=@StartDate and b.opData_Date <=@EndDate and opData_Type_ID = 1
or (b.opData_Year < a.opData_year) AND a.Opdata_Date >=@StartDate and a.opData_Date <=@EndDate AND b.Opdata_Date >=@StartDate and b.opData_Date <=@EndDate and opData_Type_ID = 1),0 ) as CActualValue,
 
a.opData_cost+ ISNULL( (SELECT SUM(b.opData_cost) from opData_Monthly b 
 
where (b.opData_Year = a.opData_Year and b.opData_month < a.opData_month) and a.Opdata_Date >=@StartDate and a.opData_Date <=@EndDate and b.Opdata_Date >=@StartDate and b.opData_Date <=@EndDate and opData_Type_ID = 1
or (b.opData_Year < a.opData_year) AND a.Opdata_Date >=@StartDate and a.opData_Date <=@EndDate AND b.Opdata_Date >=@StartDate and b.opData_Date <=@EndDate and opData_Type_ID = 1),0 ) as CActualCost
 
FROM opData_Monthly a 
WHERE a.Opdata_Date >=@StartDate and a.opData_Date <=@EndDate
Order by opData_Date

Open in new window

0
Comment
Question by:softdimensions
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 3
7 Comments
 
LVL 41

Expert Comment

by:ralmada
ID: 24436114
You mean like this?
SELECT 
	a.opData_Year, 
	a.opData_month ,
	a.opData_value+ ISNULL( (SELECT SUM(ISNULL(b.opData_Value,0)) from opData_Monthly b 
				where (b.opData_Year = a.opData_Year and 
					b.opData_month < a.opData_month) and 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate and 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 1
					or (b.opData_Year < a.opData_year) AND 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate AND 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 1),0 ) as CActualValue,
 
	a.opData_cost+ ISNULL( (SELECT SUM(b.opData_cost) from opData_Monthly b 
				where (b.opData_Year = a.opData_Year and 
					b.opData_month < a.opData_month) and 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate and 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 1
					or (b.opData_Year < a.opData_year) AND 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate AND 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 1),0 ) as CActualCost,
 
	ISNULL( (SELECT SUM(ISNULL(b.opData_Value,0)) from opData_Monthly b 
				where (b.opData_Year = a.opData_Year and 
					b.opData_month < a.opData_month) and 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate and 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 2
					or (b.opData_Year < a.opData_year) AND 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate AND 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 2),0 ) as ProjectedValue,
 
	ISNULL( (SELECT SUM(b.opData_cost) from opData_Monthly b 
				where (b.opData_Year = a.opData_Year and 
					b.opData_month < a.opData_month) and 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate and 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 2
					or (b.opData_Year < a.opData_year) AND 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate AND 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 2),0 ) as ProjectedCost
 
FROM opData_Monthly a 
WHERE a.Opdata_Date >=@StartDate and a.opData_Date <=@EndDate
Order by opData_Date

Open in new window

0
 

Author Comment

by:softdimensions
ID: 24436228
The sql statement you returned gives 2 rows per month.  The data in the columns are correct but I only want to see 1 row per month year value
0
 
LVL 41

Expert Comment

by:ralmada
ID: 24436262
Are the two rows duplicate? try adding distinct:
select distinct......
 
0
Instantly Create Instructional Tutorials

Contextual Guidance at the moment of need helps your employees adopt to new software or processes instantly. Boost knowledge retention and employee engagement step-by-step with one easy solution.

 

Author Comment

by:softdimensions
ID: 24436320
using DISTINCT renders the following  result set.

2008      7      2008-07-01 00:00:00.000      7.02      0.1      0      0
2008      8      2008-08-01 00:00:00.000      15.04      0.2      7.02      0.1
2008      9      2008-09-01 00:00:00.000      24.06      0.3      15.04      0.2
2008      10      2008-10-01 00:00:00.000      34.08      0.4      24.06      0.3
2008      11      2008-11-01 00:00:00.000      45.1      0.5      34.08      0.4
2008      12      2008-12-01 00:00:00.000      57.12      0.6      45.1      0.5
2009      1      2009-01-01 00:00:00.000      58.14      0.7      57.12      0.6
2009      2      2009-02-01 00:00:00.000      60.16      0.8      58.14      0.7
2009      3      2009-03-01 00:00:00.000      63.18      0.9      60.16      0.8
2009      4      2009-04-01 00:00:00.000      67.2      1      63.18      0.9
2009      5      2009-05-01 00:00:00.000      72.22      1.1      67.2      1
2009      6      2009-06-01 00:00:00.000      78.24      1.2      72.22      1.1
2009      7      2009-07-01 00:00:00.000      85.26      1.3      78.24      1.2
2009      8      2009-08-01 00:00:00.000      93.28      1.4      85.26      1.3
2009      9      2009-09-01 00:00:00.000      102.3      1.5      93.28      1.4
2009      10      2009-10-01 00:00:00.000      112.32      1.6      102.3      1.5
2009      11      2009-11-01 00:00:00.000      123.34      1.7      112.32      1.6
2009      12      2009-12-01 00:00:00.000      135.36      1.8      123.34      1.7
2010      1      2010-01-01 00:00:00.000      136.38      1.9      135.36      1.8
2010      2      2010-02-01 00:00:00.000      138.4      2      136.38      1.9
2010      3      2010-03-01 00:00:00.000      141.42      2.1      138.4      2
2010      4      2010-04-01 00:00:00.000      145.44      2.2      141.42      2.1
2010      5      2010-05-01 00:00:00.000      150.46      2.3      145.44      2.2
2010      6      2010-06-01 00:00:00.000      156.48      2.4      150.46      2.3
2010      7      2010-07-01 00:00:00.000      163.5      2.5      156.48      2.4

With this temp set of data the projected and actual are the same but look at the difference between row 1 and 2
0
 
LVL 41

Expert Comment

by:ralmada
ID: 24438134
I'm not sure I'm following you.  Can you please advise if the query worked? If not please provide some sample data and expected result.
0
 

Author Comment

by:softdimensions
ID: 24438155
2008      7      2008-07-01 00:00:00.000      7.02      0.1      0      0
2008      8      2008-08-01 00:00:00.000      15.04      0.2      7.02      0.1
2008      9      2008-09-01 00:00:00.000      24.06      0.3      15.04      0.2

The above is the result with the query

2008      7      2008-07-01 00:00:00.000      7.02      0.1      7.02      0.1
2008      8      2008-08-01 00:00:00.000      15.04      0.2     14.04      0.2
2008      9      2008-09-01 00:00:00.000      24.06      0.3      24.06      0.3

is the expected result.  In this case the data is the same for projected and actual since it is temp data.
0
 
LVL 41

Accepted Solution

by:
ralmada earned 500 total points
ID: 24438173
What if you try something like this?
SELECT 
	a.opData_Year, 
	a.opData_month ,
	a.opData_value+ ISNULL( (SELECT SUM(ISNULL(b.opData_Value,0)) from opData_Monthly b 
				where (b.opData_Year = a.opData_Year and 
					b.opData_month < a.opData_month) and 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate and 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 1
					or (b.opData_Year < a.opData_year) AND 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate AND 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 1),0 ) as CActualValue,
 
	a.opData_cost+ ISNULL( (SELECT SUM(b.opData_cost) from opData_Monthly b 
				where (b.opData_Year = a.opData_Year and 
					b.opData_month < a.opData_month) and 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate and 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 1
					or (b.opData_Year < a.opData_year) AND 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate AND 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 1),0 ) as CActualCost,
 
	a.opData_cost+ ISNULL( (SELECT SUM(ISNULL(b.opData_Value,0)) from opData_Monthly b 
				where (b.opData_Year = a.opData_Year and 
					b.opData_month < a.opData_month) and 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate and 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 2
					or (b.opData_Year < a.opData_year) AND 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate AND 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 2),0 ) as ProjectedValue,
 
	a.opData_cost+ ISNULL( (SELECT SUM(b.opData_cost) from opData_Monthly b 
				where (b.opData_Year = a.opData_Year and 
					b.opData_month < a.opData_month) and 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate and 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 2
					or (b.opData_Year < a.opData_year) AND 
					a.Opdata_Date >=@StartDate and 
					a.opData_Date <=@EndDate AND 
					b.Opdata_Date >=@StartDate and 
					b.opData_Date <=@EndDate and opData_Type_ID = 2),0 ) as ProjectedCost
 
FROM opData_Monthly a 
WHERE a.Opdata_Date >=@StartDate and a.opData_Date <=@EndDate
Order by opData_Date

Open in new window

0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Truncate vs Delete 63 108
Move SQL 2005 Express to Server 2012R2 19 180
display data in text field from data base for updating 6 77
denied execute as 13 57
This article will describe one method to parse a delimited string into a table of data.   Why would I do that you ask?  Let's say that you need to pass multiple parameters into a stored procedure to search for.  For our sake, we'll say that we wa…
So every once in a while at work I am asked to export data from one table and insert it into another on a different server.  I hate doing this.  There's so many different tables and data types.  Some column data needs quoted and some doesn't.  What …
Nobody understands Phishing better than an anti-spam company. That’s why we are providing Phishing Awareness Training to our customers. According to a report by Verizon, only 3% of targeted users report malicious emails to management. With compan…

732 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question