Netgear VPN Setup w/dynamic dns

I have a Netgear FVS114 firewall and the Safe-Net client.  I am trying to find a sample comfig that uses dynamically assigned public ip addressing on the FVS114.  I do have dynamic dns set up through dyndns.org to permit the use of FQDN for the Netgear ID.  The Internet connection is through SBC dsl service.  Internet access works fine.
whetham484Asked:
Who is Participating?
 
Rob WilliamsCommented:
The following link shows a Netgear VPN client and router configuration using a static IP:
http://www.lan-2-wan.com/vpns-netgear-sample1.htm
The changes required to use a dynamic IP and a DDNS service are:
-In the 1st screen shot under ID type choose:
        ID Type  Any                             Gateway Hostname
                      Any ID (grayed out)    your.ddns-domain.name
-In the 6th screen shot  (IKE Policy Configuration), under local choose:
        Local identity Type  =  Fully Qualified Domain Name
        Local Identity Data =  your.ddns-domain.name

Where your.ddns-domain.name is your domain name assigned by the dynamic name service to which you are subscribed such as  www.dyndns.com or www.no-ip.com
0
 
whetham484Author Commented:
Thanks for the info.  I'll give it a try
0
 
Rob WilliamsCommented:
Thanks whetham484. Good luck with it.
Cheers!
--Rob
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.