Link to home
Start Free TrialLog in
Avatar of Tercestisi
TercestisiFlag for United States of America

asked on

Your ASA image has a version number unknown which is not supported by ASDM 6.1(5)

I have successfully updated both the asa image and asdm to 8.0(4) and 6.1(5), respectively, on both an ASA 5505 and 5510 which I can access ASDM on both, but I have a third ADA 5505 here and I simply cannot access ASDM on this device.

I get the "Your ASA image has a version number unknown which is not supported by ASDM 6.1(5)," even though I can confirm that it is booting asa804-k8.bin, like the rest.

Any ideas? I have tried re-uploading the asa image as well as reinstalling the ASDM launcher.
SOLUTION
Avatar of Les Moore
Les Moore
Flag of United States of America image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of Tercestisi

ASKER

They are set; I have confirmed that. I went ahead and removed the commands and reapplied but no change.

I will look into updating the images, but I am still curious as to why it's not working on this device when it is working fine on the others.
Did you remove the old image completely? I had one that kept booting into the old image no matter what I put in the config. Only way to fix it was to delete the old image completely. It will boot from the first valid image it can find on flash with no boot system command in the config.
ASKER CERTIFIED SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
i am having same problem after factory default, can you please advise how to change asdm image disk, i have 2 asdm images in my 5505 but don't know how to change it.
Thank you found solution from your post.