An account failed to log on, ERROR_NO_SUCH_DOMAIN

I can logon as domain admin, however I cannot logon to my TS Server using a regular user account (new domain, no workstations yet).
I have two DCs and two TS/XenApp5 all Windows 2008. Found error message using the NLTest.exe command, error follows the Operations Master FSMO role

Thanks in advance for any help!

Here are the results of nltest against each domain controllers (2 DCs): ADC1.aplp.local is operations master
C:\Users\Administrator>nltest /sc_query:aplp.local /server:adc1.aplp.local
I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN
C:\Users\Administrator>nltest /sc_query:aplp.local /server:adc2.aplp.local
Flags: 30 HAS_IP  HAS_TIMESERV
Trusted DC Name \\ADC1.APLP.local
Trusted DC Connection Status Status = 0 0x0 NERR_Success
The command completed successfully

Here are the results of nltest against each domain controllers (2 DCs) after changing the Operation Master Role to ADC2: ADC2.aplp.local is now operations master
C:\Users\Administrator>nltest /sc_query:aplp.local /server:adc1.aplp.local
Flags: 30 HAS_IP  HAS_TIMESERV
Trusted DC Name \\ADC2
Trusted DC Connection Status Status = 0 0x0 NERR_Success
The command completed successfully
C:\Users\Administrator>nltest /sc_query:aplp.local /server:adc2.aplp.local
I_NetLogonControl failed: Status = 1355 0x54b ERROR_NO_SUCH_DOMAIN

In AD Users and computers, when I right click on AD Users and Computers > Click Change Directory Server I see this in the window:
ADC1.APLP.local Default-First-site-Name GC W2K8 Unavailable (status)
ADC2.APLP.local Default-First-site-Name GC W2K8 Online (status)

Here is the error on the TS Server when attemplting to logon as a user (not sure if this is two problems or one):
An account failed to log on.

Subject:
      Security ID:            NULL SID
      Account Name:            -
      Account Domain:            -
      Logon ID:            0x0

Logon Type:                  3

Account For Which Logon Failed:
      Security ID:            NULL SID
      Account Name:            dalarie
      Account Domain:            APLP

Failure Information:
      Failure Reason:            Domain sid inconsistent.
      Status:                  0xc000006d
      Sub Status:            0xc000019b

Process Information:
      Caller Process ID:      0x0
      Caller Process Name:      -

Network Information:
      Workstation Name:      DTECH002
      Source Network Address:      -
      Source Port:            -

Detailed Authentication Information:
      Logon Process:            NtLmSsp
      Authentication Package:      NTLM
      Transited Services:      -
      Package Name (NTLM only):      -
      Key Length:            0

This event is generated when a logon request fails. It is generated on the computer where access was attempted.

The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.

The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).

The Process Information fields indicate which account and process on the system requested the logon.

The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.

The authentication information fields provide detailed information about this specific logon request.
      - Transited services indicate which intermediate services have participated in this logon request.
      - Package name indicates which sub-protocol was used among the NTLM protocols.
      - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
GeraldWinnipeg56Asked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

GeraldWinnipeg56Author Commented:
I found the answer:
The servers are all running on XenServer (virtually) and were all created from a template (image). Sysprep had not been run on the base image therefore the Inconsistent SID message.
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Microsoft Server OS

From novice to tech pro — start learning today.