Link to home
Start Free TrialLog in
Avatar of McGregor09
McGregor09Flag for Spain

asked on

Checking a hard disc drive in a RAID

Hello everybody.

I have one server with an SCSI Adaptec card for a  RAID 5.  The computer gives me once in a  week the blue screen with the following error:  KERNEL_STACK_INPAGE_ERROR.

I beileve it is an error with the HDD, but as the RAID contains 3 of them, I do not know which one exactly is the erroneous one. We have performed a Scandisk to the logical unit of the RAID but gave no errors.

How can I check which HDD is causing the crashes?

Thanks in advance!
Avatar of MaurizioSchmidt
MaurizioSchmidt
Flag of Germany image

Just went into the Adaptec Menu at the Boot Sequence and Check the HDD one by one.
Avatar of BALMUKUND KESHAV
Are You Sure its HDD Error ?
It might be RAM Problem .

Bm Keshav
Avatar of McGregor09

ASKER

OK, we have tested the 3 drives from the RAID and  all of them seemed to be OK, as no error was shown during the test with the Adaptec "built-in" tests.

Which tool could I use to test 8 GB of RAM in a Windows Server 2003 x64?
ASKER CERTIFIED SOLUTION
Avatar of MaurizioSchmidt
MaurizioSchmidt
Flag of Germany image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
The first one made the trick.

Thanks!