<div>
I have check the power supplies with known good ones and still the same issue. &nbsp;The server would not turn off by pressing the on/off button. &nbsp;I have to pull the power cord in order to get it to shut down.
</div>


I have check the power supplies with known good ones and still the same issue.  The server would not turn off by pressing the on/off button.  I have to pull the power cord in order to get it to shut down.

<div>
Yes, I did follow your other points, still nothing.
</div>


Yes, I did follow your other points, still nothing.

<div>
<div class="content wysiwyg-content">
I have a MPC NetFrame 3640 server that does not boot up to the operating system. &nbsp;All the lights are on on the motherboard, but the drives are not spinning up like it normally does. &nbsp;The server was working fine and just this morning went dead.
</div>
</div>


I have a MPC NetFrame 3640 server that does not boot up to the operating system.  All the lights are on on the motherboard, but the drives are not spinning up like it normally does.  The server was working fine and just this morning went dead.

MPC Netframe 3640

Servers are computing devices that are similar to desktop computers in that they have the same basic components, but are significantly different in size, configuration and purpose. Servers are usually accessed over a network, and many run unattended, without a computer monitor, input device, audio hardware or USB interfaces. Many servers do not have a graphical user interface (GUI), and are configured and managed remotely. Servers typically include hardware redundancy such as dual power supplies, RAID disk systems, and ECC memory, along with extensive pre-boot memory testing and verification. Critical components might be hot swappable, and to guard against overheating, servers might have more powerful fans or use water cooling.