Solved

Need a manual for linksys wireless-g 2.4 ghz router model no. wrt54g v2.2

Posted on 2009-06-28
1
1,353 Views
Last Modified: 2012-05-07
Dea Sir ,
              i have  linksys wireless-g 2.4 ghz router model no. wrt54g v2.2 . i need a manual for it to configure it step by step .
also please i would like to know that as it is broadband router will it work normally with 1 MB ADSL internet line?and also what is broad band router and normal roter .
regards
0
Comment
Question by:sanjeevkmrs
1 Comment
 
LVL 76

Accepted Solution

by:
Alan Hardisty earned 500 total points
ID: 24730511
Here are the user guide and Quick Installation Guide for you.
This type of router will only work if you have an ADSL modem to connect you to the interent first.
It should handle a 1Mb ADSL conection without any problems.
Not a lot of difference between a broadband router and a normal router.

WRT54Gv5-EU-ug-15.pdf
WRT54G-v1.1-qi-0.pdf
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

823 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question