Solved

I have an web server (IIS) on my network, hosting several sites . What I need to do to access this sites from the local network?

Posted on 2009-06-28
4
322 Views
Last Modified: 2012-06-27
Hi,

I have a Web server hosting some websites and I can't acces this sites from the local network.
I have 10MB ADSL access - The router si conected to port 1 of my switch and al the computers and the server to the same switch

It's working well when somebody access the webpages from outside but I can´t see the pages from local network.

I put the server local IP (192.168.1.33) in the DMZ inside the router and I also added port forwarding setings inside the router like TCP 80 ---> 192.168.1.33 ...

The problem is that one of the sites (script -> ASP) use CDO for sending emails.
It's work nice but when the site try to send a local page via email I get an error:

CDO.Message.1 error '80040218'

Unknown Error

/mailpp_sunsizbor.asp, line 36
 

<%
 
Dim objConfig,smarthost,msgBody 
set Mail = createobject("cdo.message")
set objConfig = createobject("cdo.configuration")
 
msgBody = "http://sunsizbor.com/mail_s_11.asp?nume=" & tName & "&user=" & tEmail 	
 
smarthost = "127.0.0.1"
' Setting the SMTP Server
Set Flds = objConfig.Fields
Flds.Item("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
Flds.Item("http://schemas.microsoft.com/cdo/configuration/smtpserver") = smarthost
Flds.Item("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = cdoBasic 'cdoAnonymous ' =0 
Flds.Item("http://schemas.microsoft.com/cdo/configuration/sendusername") = "info"
Flds.Item("http://schemas.microsoft.com/cdo/configuration/sendpassword") = "*********" 
Flds.Item("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 25 
Flds.Item("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = False
Flds.Item("http://schemas.microsoft.com/cdo/configuration/smtpconnectiontimeout") = 60
 
 
Flds.update
 
Set Mail.Configuration = objConfig
Mail.To = temail
'mail.BCC = ""
Mail.From = "info@sunsizbor.com"
Mail.Subject = msgSubject
Mail.CreateMHTMLBody msgBody         ' THIS IS LINE 36
Mail.fields.update
Mail.Send
 
set objConfig = nothing
 
 
Set Mail = Nothing
End Function
%>

Open in new window

router.jpg
0
Comment
Question by:cardei80
  • 2
4 Comments
 
LVL 5

Expert Comment

by:rizwanidrees
ID: 24730546
Have you checked DNS entries for locally hosted domains in your DNS Server?
0
 

Author Comment

by:cardei80
ID: 24730649
I don´t have a DNS Server role installed on the local server.
The DNS service that I use is provided by the domain registrand company.
There in the control panel of this company I set the ip 80.37.xx.xx (my static iP) for A, MX, WWW, FTP, MAIL ...

I have to install a DNS server role in this case?
How I need to configure this ??
Thanks
0
 
LVL 5

Accepted Solution

by:
rizwanidrees earned 500 total points
ID: 24730709
If you have Domain controller installed installed in your network than there must be a DNS server role also. and all request from your local network go to your local dns server first than forwarded to router
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question