Solved

EIGRP between ASA5520 and Cisco 3750

Posted on 2009-06-29
1
774 Views
Last Modified: 2012-05-07
I am configuring EIGRP between mentioned devices. On 3750 side i can see neighborship formed

3   10.40.50.65             Vl417             14 00:00:00    1  2000  3  0

However, on ASA side no neighborship formed.

When looking at debug messages, I can see that ASA sends hello packets, but receives nothing. 3750 sends and receives hello packets, but update packets are retransmitted periodically. Accordign to debug, ASA receives no update messages. Pings between devices are succesfull.

I am confused.
3750 conf
 
router eigrp 2008
network 10.40.50.64 0.0.0.3
neighbor 10.40.50.65 Vlan417
 
ASA config
 
router eigrp 2008
 no auto-summary
 eigrp router-id 10.40.50.65
 neighbor 10.40.50.66 interface eigrp
network 10.40.50.64 255.255.255.252

Open in new window

0
Comment
Question by:fgasimzade
1 Comment
 
LVL 18

Accepted Solution

by:
fgasimzade earned 0 total points
ID: 24742677
Issue is solved, I just restarted ASA and everything worked fine
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Phishing is at the top of most security top 10 efforts you should be pursuing in 2016 and beyond. If you don't have phishing incorporated into your Security Awareness Program yet, now is the time. Phishers, and the scams they use, are only going to …
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question