Solved

How to reset HP Storageworks MSA san switch

Posted on 2009-06-29
2
6,468 Views
Last Modified: 2013-11-14
my company just bought 1 unit used HP MSA 1000 with intergrated storageworks san switch 2/8. The previous user never release their san switch login password.
Just to check any of you guys have any idea can factory reset the switch

thanks
0
Comment
Question by:hell_angel
2 Comments
 
LVL 55

Accepted Solution

by:
andyalder earned 500 total points
Comment Utility
Have you tried the default brocade passwords - www.default-password.info/brocade/
0
 

Expert Comment

by:tharris1917
Comment Utility
For the Brocade switches running FOS firmware 2.x or 3.x there is a special Brocade firmware image you need to recover the password. This software is required if the password is lost. If you have Brocade 5.x or 6.x and the Boot Prom password has not been set (different from the switch password), then it can be recovered by accessing the switch setup with a local console serial connection.
0

Featured Post

Save on storage to protect fatherhood memories

You're the dad who has everything. This Father's Day, make sure your family memories are protected. My Passport Ultra has automatic backup and password protection to keep your cherished photos and videos safe. With up to 3TB, you have plenty of room to hold the adventures ahead.

Join & Write a Comment

Hi, I've made you some graphics for a better understanding how RAID works. First of all, there are two ways a raid can be generated: - By hardware - By software What does that mean? This means: If you have a hardware RAID controller, there…
Ever notice how you can't use a new drive in Windows without having Windows assigning a Disk Signature?  Ever have a signature collision problem (especially with Virtual Machines?)  This article is intended to help you understand what's going on and…
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now