Solved

Windows Server 2008 Cluster disk

Posted on 2009-06-30
1
390 Views
Last Modified: 2013-11-14
Hi All,
i have 2 Windows Server 2008 Ent running Hyper-V on DL380G5 in a cluster configuration, HP 2012fc as storage.
I would like tohave a VM with 2 HD attached, so I've created the VM machine and then added to the cluster. It was succesfully added with the 2 Hd attached, the virtual system starts with no error.
But if I reboot the host, as the disk seems to be presented in a different way (for instance, before rebooting are disk 1 and disk 5 and after the reboot are disk 2 and disk 4) the VM fail to restart.
Any suggestion on how to fix it?
0
Comment
Question by:candrea71
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 15

Accepted Solution

by:
plimpias earned 500 total points
ID: 24759327
make sure that your dependacies are correct in the failover cluster management. I would assume they are not correct and this is why it is throwing it off. In the properties on the VM make sure all your clustered servers are available for the failover.
0

Featured Post

Forrester Webinar: xMatters Delivers 261% ROI

Guest speaker Dean Davison, Forrester Principal Consultant, explains how a Fortune 500 communication company using xMatters found these results: Achieved a 261% ROI, Experienced $753,280 in net present value benefits over 3 years and Reduced MTTR by 91% for tier 1 incidents.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article explains how to install and use the NTBackup utility that comes with Windows Server.
In this article we will learn how to backup a VMware farm using Nakivo Backup & Replication. In this tutorial we will install the software on a Windows 2012 R2 Server.
This tutorial will walk an individual through locating and launching the BEUtility application and how to execute it on the appropriate database. Log onto the server running the Backup Exec database. In a larger environment, this would generally be …
This tutorial will show how to configure a new Backup Exec 2012 server and move an existing database to that server with the use of the BEUtility. Install Backup Exec 2012 on the new server and apply all of the latest hotfixes and service packs. The…

732 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question