Solved

laptop communicating with different vlans

Posted on 2009-06-30
4
259 Views
Last Modified: 2013-11-12
Hi,

I have a Cisco 3750 and I have added the main vlan from the trunked switch so i can get on the network. Let's call it vlan 800. I plan on also adding another vlan so I can add oracle to it and another vlan for something else. Now I have vlan 800, 801 (oracle), 802 (etc). I now plug in a laptop into the configured 3750. Do I have to do anything else to the vlans or the switch so the laptop will be able to access the network and oracle since it is in a separate vlan or do I need to do something else. I hope it makes sense.

Thanks
0
Comment
Question by:Sainai
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 400 total points
ID: 24743909
I'm not sure if this is already configured on a 3750 (it won't hurt if it is) but you'll need to enable IP routing.

You will also need to create VLAN interfaces on the 3750 for each of those VLANs with IP addresses. Finally, you will need to configure the default gateway for each host with the IP address of the appropriate VLAN interface.


ip routing
int vlan 800
 ip address 192.168.80.1 255.255.255.0
 no shut
int vlan 801
 ip address 192.168.81.1 255.255.255.0
 no shut
int vlan 802
 ip address 192.168.82.1 255.255.255.0
 no shut

Open in new window

0
 

Author Comment

by:Sainai
ID: 24744221
so let's say the ip address 192.168.82.1 will be used as the dg for the oracle machine..correct? Once this is done the bal once connected to the switch should be able to hit the machines on the different vlans..correct? Thanks much.
0
 
LVL 50

Expert Comment

by:Don Johnston
ID: 24744663
Yes...If the DG on the other hosts are correctly configured.
0
 

Author Comment

by:Sainai
ID: 24745657
thanks don will set it up and let you know.
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
ospf neighbors not coming up 6 71
Cisco 3800 series and WISM2 1 40
Vsphere web not showing changes made by ssh console 5 73
Dell PowerConnect 2824 w/ two DHCP 6 54
Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
Using in-flight Wi-Fi when you travel? Business travelers beware! In-flight Wi-Fi networks could rip the door right off your digital privacy portal. That’s no joke either, as it might also provide a convenient entrance for bad threat actors.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question