Solved

Local domain name access - Cicso ASA5505

Posted on 2009-06-30
2
282 Views
Last Modified: 2012-05-07
We have a web server in our office at 192.168.1.15 which is accessible from the web on port 443 by going to https://webserver.domain.com.  When we are local in our office on the 192.168.1.0 subnet we are unable to access the web server by name navigating to https://webserver.domain.com.  Currently we simply type https://192.168.1.15 which works great other then the security warning that pops up every time you try to access the page.  We purchased an SSL cert for webserver.domain.com which is why we would like to access our server on the inside by name and not IP address.  Our main router/firewall we are using is a Cisco ASA5505.  I am sure there is something we can quickly add to the Cisco ASDM to accomplish this.  Any ideas would be greatly appreciated.

Thanks
0
Comment
Question by:ipconfig610
2 Comments
 
LVL 28

Accepted Solution

by:
asavener earned 500 total points
Comment Utility
You need to enable the DNS re-write feature on the static NAT entry for the webserver:  http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807968c8.shtml
0
 

Author Comment

by:ipconfig610
Comment Utility
wow that was really simply.  Works great thanks!
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Suggested Solutions

This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now