Solved

Netgear VPN Setup DG834G

Posted on 2009-06-30
5
2,039 Views
Last Modified: 2012-05-07
I need to setup a VPN so users can remote into a network on a DG834G. Can I use the windows VPN client or do I need this prosafe software. Also how do I actually set up the VPN on the router side and on the client side
0
Comment
Question by:mistyfly
  • 3
  • 2
5 Comments
 
LVL 32

Expert Comment

by:dpk_wal
ID: 24746371
Netgear DG834G acts as IPSec VPN endpoint, hence you cannot use windows network connection for establishing VPN tunnel; however, you have option to use inbuilt IPSec service or better use prosafe VPN client.

Please look at the article below to configure DG834 and prosafe client:
http://kb.netgear.com/ci/fattach/get/5/1235058493/redirect/1

Please let know if you need more details.

Thank you.
0
 

Author Comment

by:mistyfly
ID: 24746496
How can I use the IPSec service? Is the prosafe free to download?
0
 
LVL 32

Expert Comment

by:dpk_wal
ID: 24746535
If you have access to Netgear website you should be able to download the client; you might need to have active support contract but not 100% sure.

There are few IPSec clients available but the configuration settings are not available, one such free client is from shrew soft [http://www.shrew.net/download/vpn]

Thank you.
0
 

Author Comment

by:mistyfly
ID: 24746591
Im new to VPN's so I may struggle with the setup. Is there a built in windows IP Sec solution?
0
 
LVL 32

Accepted Solution

by:
dpk_wal earned 500 total points
ID: 24746875
There is windows IPSec but it is tough to configure also the vendor (read Netgear) would not provide any technical support for any client other than theirs.

Please look at link below to configure inbuilt IPSec on windows:
http://www.windowsecurity.com/articles/Securing_Data_in_Transit_with_IPSec.html

Thank you.
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

Suggested Solutions

The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now