• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 946
  • Last Modified:

Error When Installing ASDM on Cisco ASA 5520

I removed the ASDM on a Cisco 5520. When I try to copy it back to flash I receive an error:
Accessing tftp://192.168.1.2/asdm-508.bin...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
%Error copying tftp://192.168.1.2/asdm-508.bin (Not enough space on device)
There is enough space. This is the same ASDM version that was on there before.

Thanks in advance

0
Merchants
Asked:
Merchants
  • 5
  • 4
1 Solution
 
nasirshCommented:
check for the space on your ASA with the
show flash
command and then post the output
0
 
MerchantsAuthor Commented:
Here it is.

ciscoasa# show flash
--#--  --length--  -----date/time------  path
   75  8192        Mar 24 2009 12:44:30  log
   79  8192        Jan 26 2009 12:00:16  crypto_archive
  143  14137344    Mar 24 2009 12:31:32  asa804-k8.bin

255426560 bytes total (240836608 bytes free)
0
 
nasirshCommented:
OK. Try this thing

conf t
copy tftp flash
Address or name of remote host []?
Source filename []?
Destination filename [asasds.bin]?


Try using this procedure. And Make sure that you are connected via the management port.
0
The Lifecycle Approach to Managing Security Policy

Managing application connectivity and security policies can be achieved more effectively when following a framework that automates repeatable processes and ensures that the right activities are performed in the right order.

 
MerchantsAuthor Commented:
I get the same thing:

ciscoasa(config)# copy tftp flash

Address or name of remote host []? 192.168.1.2

Source filename []? asdm-508.bin

Destination filename [asdm-508.bin]?

Accessing tftp://192.168.1.2/asdm-508.bin...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
%Error copying tftp://192.168.1.2/asdm-508.bin (Not enough space on device)


0
 
nasirshCommented:
Are you connected via mangement port. and are you able to ping the host from which you are copying the file
0
 
MerchantsAuthor Commented:
Yes, I am connected via management port and I can ping it. This ASA is not in production, so I am connected directly from my PC to the ASA.
0
 
nasirshCommented:
OK. Erase your current flash and then try to copy Again
0
 
MerchantsAuthor Commented:
I did erease flash and then tried it. I got the same error message. I did put back the IOS (asa708-k8.bin) and that worked fine. This has got me stumpped.
0
 
MerchantsAuthor Commented:
I got it figured out. I reformatted flash and it loaded like it should.

Thanks for your help. This was a weired one
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

  • 5
  • 4
Tackle projects and never again get stuck behind a technical roadblock.
Join Now