Want to win a PS4? Go Premium and enter to win our High-Tech Treats giveaway. Enter to Win

x
?
Solved

Win 2003 TS in SBS 2003 network not allowing multiple connections...

Posted on 2009-07-01
4
Medium Priority
?
386 Views
Last Modified: 2013-11-21
Hi All:

I have a problem with a Windows 2003 R2 Server setup as a member server and running terminal services in application mode in a SBS 2003 network.  

(1) user can connect with no problems but when a 2nd connection tries to connect, it is immediately denied access with the message: This compute can't connect to the remote computer.  Try connecting again later.  If the problem persists, please contact the owner of the remote computer..."

The TS has been activated and (5) User CALs have been installed and activated via the web to the MS Clearing House.  The TS has the license server installed on it as well and is setup as a Domain license server with Per User licenses.

I have run the LSView.exe utility and it does show the license server running and green.

Anyone have any ideas?

Thanks!
Jeff
0
Comment
Question by:e-Tec_Support
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 6

Expert Comment

by:naughtynat
ID: 24773332
Can any 1 user connect? Or just 1 particular user?

Usually it would generate a different error if it was a licensing issue (well I believe so as we use more Device Licenses).
0
 
LVL 1

Author Comment

by:e-Tec_Support
ID: 24784565
Anyone connect, however once (1) person is on, no one else can connect, not even the administrator on the console.

Is there any where else I should be looking for errors other than the event log?
0
 
LVL 1

Accepted Solution

by:
e-Tec_Support earned 0 total points
ID: 24858164
Here's an update and found the solution, someone had turned on a group policy that only allows (1) connection at a time.  Removed the GP and now all users can connect simultaneously.

Thanks for all your help anyways.
0
 
LVL 6

Expert Comment

by:naughtynat
ID: 24858381
For some reason I must have missed the earlier response so hadnt checked this question since initial comment.

Main thing is you have it working now! :)
0

Featured Post

VIDEO: THE CONCERTO CLOUD FOR HEALTHCARE

Modern healthcare requires a modern cloud. View this brief video to understand how the Concerto Cloud for Healthcare can help your organization.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Have you considered what group policies are backwards and forwards compatible? Windows Active Directory servers and clients use group policy templates to deploy sets of policies within your domain. But, there is a catch to deploying policies. The…
Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
How to fix incompatible JVM issue while installing Eclipse While installing Eclipse in windows, got one error like above and unable to proceed with the installation. This video describes how to successfully install Eclipse. How to solve incompa…
Please read the paragraph below before following the instructions in the video — there are important caveats in the paragraph that I did not mention in the video. If your PaperPort 12 or PaperPort 14 is failing to start, or crashing, or hanging, …

618 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question