Solved

Unable to click security audit in Cisco SDM

Posted on 2009-07-01
2
390 Views
Last Modified: 2012-05-07
I'm having a problem with the cisco sdm.  It's installed correctly, I've configured my router with the following:
ip http server
ip http secure-server
ip http authentication local
ip http timeout-policy idle 600 life 86400 requests 10000
line vty 0 4
login local
transport input telnet ssh
line vty 5 15
login local
privilege level 15
transport input telnet ssh

I've also created the user with level 15 access.

I can bring up the SDM and configure anything I want to via the SDM.--EXCEPT the Security Audit!!!!!  The button is there, if I click on it it greys out and nothing happens.  Do you think this could be an IOS issue?  I'm running Version 12.3(8)T4. on a 2811 router.

I've tried connecting from multiple computers with the same results.
0
Comment
Question by:sstire
  • 2
2 Comments
 
LVL 6

Accepted Solution

by:
ged125 earned 500 total points
ID: 24759029
This is more than likely a Java issue.  Take a look at this post, looks like you need somewhere between version 1.4.2 and 1.5.

http://www.velocityreviews.com/forums/t39998-cisco-sdm-is-not-working.html
0
 
LVL 6

Expert Comment

by:ged125
ID: 24759042
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
New Server 172.16.200.2  was moved from behind Router R2 f0/1 to behind router R1 int f/01 and has now address 172.16.100.2. But we want users still to be able to connected to it by old IP. How to do it ? We can used destination NAT (DNAT).  In DNAT…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

696 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question