Solved

Is it time for Windows server 2008 64bits as a Terminal server?

Posted on 2009-07-01
4
528 Views
Last Modified: 2012-05-07
Hi ,

I am planning to get a new server to replace the old Terminal server,
the old one is running windows 2003 Std R2 . it has modem, printer, label printer connected.

Can I get windows server 2008 64bits installed at new server?
if so , will the other device works well?
0
Comment
Question by:GordonLiq
  • 2
  • 2
4 Comments
 
LVL 20

Expert Comment

by:EndureKona
ID: 24759502
First you need to see if there are drivers will run your devices on 2008 x64.    If they do and all the software you require will run I would go with 2008 x64.
0
 

Author Comment

by:GordonLiq
ID: 24759538
Software will be OK , it is office 2007 32bits.
but I cannot find the driver for modem, printer at manufactory's website.
one is DYMO label writer 400 .
one is normal fax modem.
0
 
LVL 20

Expert Comment

by:EndureKona
ID: 24759556
Only questions are about the modem and printer?   Most printers should work?    Is it a standard HP, Xerox, etc?     For the modem Windows 2008 might install it with something native.    What are he models of both of these devices?
0
 

Accepted Solution

by:
GordonLiq earned 0 total points
ID: 24760810
The modem is D-Link v.92 analog external modem
and
Net comm am5066 RavIII v.92 data/fax modem.

The print is DYMO Label write 400
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Possible fixes for Windows 7 and Windows Server 2008 updating problem. Solutions mentioned are from Microsoft themselves. I started a case with them from our Microsoft Silver Partner option to open a case and get direct support from Microsoft. If s…
A procedure for exporting installed hotfix details of remote computers using powershell
This tutorial will walk an individual through locating and launching the BEUtility application and how to execute it on the appropriate database. Log onto the server running the Backup Exec database. In a larger environment, this would generally be …
This tutorial will walk an individual through locating and launching the BEUtility application to properly change the service account username and\or password in situation where it may be necessary or where the password has been inadvertently change…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

23 Experts available now in Live!

Get 1:1 Help Now