Solved

Where can I buy a Replacement Motherboard Foxconn 945P7AA-8EKRS2?

Posted on 2009-07-02
8
433 Views
Last Modified: 2013-11-09
Hi all,

My  motherboard has died - I want to replace it.

This is my board
http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?id=en-us0000002

Where can I buy one though? I am based in the UK and have tried all the companies Foxconn recommend/which sell their equipment, but no luck. Any suggestions?
0
Comment
Question by:unrealone1
8 Comments
 
LVL 13

Expert Comment

by:Brum07
ID: 24762207
0
 
LVL 1

Author Comment

by:unrealone1
ID: 24762284
Hi,

Thanks for the link - but I don't think thats the same board?
0
 
LVL 1

Author Comment

by:unrealone1
ID: 24762313
The ram I currently have in the failed board, is ddr2 etc. This board is ddr and only has 2 bays.
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 1

Author Comment

by:unrealone1
ID: 24763638
Any other suggestions.
0
 
LVL 7

Accepted Solution

by:
QEMS2 earned 400 total points
ID: 24763906
0
 
LVL 1

Author Comment

by:unrealone1
ID: 24764331
Will my existing Ram work in these boards?
0
 
LVL 39

Assisted Solution

by:PUNKY
PUNKY earned 100 total points
ID: 24765777
If you only buy same board in order to use all current components, then it is hard and might be expensive. Fortunely, your system board is not too old based on specs from the link you gave:
- Intel® Pentium® 4, Celeron D processors, Socket T (LGA775)
- FSB 1066 / 800 MHz
- Dual channel DDR2 533/667 x4 DIMMs
- PCIe x16, 2 x PCIe x 1
- ATA x 3 + Serial ATAII x 4
- 7.1 channel Audio, HDA (Realtek)
- Dual GbE LAN (Broadcom)
- IEEE 1394a (Fire Wire)+
- 8 USB 2.0 ports
You better look for newer motherboard, not used ones. Expect for motherboard that uses DDR3 memory type and new CPU types (such as i7 or quad-core), you should be ok. Such board in the link below is ok:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157145  
0
 
LVL 7

Expert Comment

by:QEMS2
ID: 24770606
yes your ram will work, same spec as current board
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Hello It is a very old trick to use a ram disk in order to boost PC performances, in the past, when in home environments the fastest common devices were floppy disks a part of the very small ram memory available was used to create a virtual hard …
Introduction: When a connection to the internet is established, there always exists a modem between the connected device and the ISP (Internet Service Provider). The Operating System (OS) on your PC controls the modem which communicates with the …
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …
The Email Laundry PDF encryption service allows companies to send confidential encrypted  emails to anybody. The PDF document can also contain attachments that are embedded in the encrypted PDF. The password is randomly generated by The Email Laundr…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question