Solved

Windows Server Standard FE 2008 x64 Browsing Problem

Posted on 2009-07-02
3
556 Views
Last Modified: 2012-08-13
I recently installed a new server 2008 box.  The first day it ran, it was fine.  Backup software and Sonicwall's Mcafee were installed.  The next day, the server could only browse to a few websites.  I can pull google, my company's home page, and maybe 2 or 3 other websites.  Otherwise, I am unable to pull any other web pages.  None.  The browser simply states that it is "waiting for xxxxxx.com" and eventually returns an error.  I've disabled all of the secure browsing features in IE.  I've removed macafee via windows uninstaller and then ran the removal utility.  I've tried using a different browser.  I can ping domains and IP addresses all day long.  I am using the same DNS server addresses as other computers on the network, and they are able to browse fine.  Clearing cache and history etc has no effect on the problem.  We have set up the server using the wizards.  I've never really seen anything like this, and am not sure what to try next.  I'd appreciate any suggestions and will be happy to provide any requested information.
0
Comment
Question by:z711500
3 Comments
 
LVL 22

Expert Comment

by:65td
ID: 24779950
Try running network monitor and see what is happening when going to those sites.

http://www.microsoft.com/DownLoads/details.aspx?familyid=983B941D-06CB-4658-B7F6-3088333D062F&displaylang=en#filelist
0
 

Expert Comment

by:mmruiz
ID: 25017744
Check IPv6 settings. Try to disable IPv6, and reenable for testing.
0
 

Accepted Solution

by:
z711500 earned 0 total points
ID: 27304519
It turned out to be an issue with the firewall.  Apologies for the delay in response.
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is the first one of a series of articles I’ll be writing to address technical issues that are always referred to as network problems. The network boundaries have changed, therefore having an understanding of how each piece in the network  puzzl…
New Windows 7 Installations take days for Windows-Updates to show up and install. This can easily be fixed. I have finally decided to write an article because this seems to get asked several times a day lately. This Article and the Links apply to…
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question