Solved

configuring STK T10K tape drives

Posted on 2009-07-03
3
676 Views
Last Modified: 2012-05-07
I have 2 Sun STK T10K tape drives connected to a t5220 via 2 hba cards. I have been unsuccessful in getting them configured on controlers c4 and c5.  I am getting the following.
# cfgadm -al -o show_FCP_dev
Ap_Id                          Type         Receptacle   Occupant     Condition
c4                             fc-fabric    connected    unconfigured unknown
c5                             fc-fabric    connected    configured   unknown
c5::500104f000907a5a,0         tape         connected    configured   failed


# /usr/sbin/fcinfo hba-port
HBA Port WWN: 2100001b3215d52f
        OS Device Name: /dev/cfg/c4
        Manufacturer: QLogic Corp.
        Model: 375-3356-02
        Firmware Version: 4.04.01
        FCode/BIOS Version:  BIOS: 1.24; fcode: 1.24; EFI: 1.8;
        Type: N-port
        State: online
        Supported Speeds: 1Gb 2Gb 4Gb
        Current Speed: 4Gb
        Node WWN: 2000001b3215d52f
HBA Port WWN: 2101001b3235d52f
        OS Device Name: /dev/cfg/c5
        Manufacturer: QLogic Corp.
        Model: 375-3356-02
        Firmware Version: 4.04.01
        FCode/BIOS Version:  BIOS: 1.24; fcode: 1.24; EFI: 1.8;
        Type: N-port
        State: online
        Supported Speeds: 1Gb 2Gb 4Gb
        Current Speed: 2Gb
        Node WWN: 2001001b3235d52f
## luxadm -e port
/devices/pci@0/pci@0/pci@8/pci@0/pci@8/SUNW,qlc@0/fp@0,0:devctl    NOT CONNECTED
/devices/pci@0/pci@0/pci@8/pci@0/pci@8/SUNW,qlc@0,1/fp@0,0:devctl  CONNECTED
#
MB/PCIE4     PCIE    4       /pci@0/pci@0/pci@8/pci@0/pci@2/QLGC,qlc                  QLGC,qlc  QLE2462
MB/PCIE4     PCIE    4       /pci@0/pci@0/pci@8/pci@0/pci@2/QLGC,qlc                  QLGC,qlc  QLE2462
MB/PCIE5     PCIE    5     /pci@0/pci@0/pci@8/pci@0/pci@8/SUNW,qlc@0    SUNW,qlc-pciex1077,143  QLE2462
MB/PCIE5     PCIE    5   /pci@0/pci@0/pci@8/pci@0/pci@8/SUNW,qlc@0,1    SUNW,qlc-pciex1077,143  QLE2462


0
Comment
Question by:clarkjim
  • 2
3 Comments
 
LVL 6

Accepted Solution

by:
javeedabdul earned 500 total points
ID: 24776445
Have a look at the InfoDoc

http://dlc.sun.com/pdf/820-4753-11/820-4753-11.pdf

Hope this help

Javeed Abdul
0
 

Author Comment

by:clarkjim
ID: 24881296
I am still having issues connecting to the tape drive. I belive it to be a cable issue.
0
 
LVL 6

Assisted Solution

by:javeedabdul
javeedabdul earned 500 total points
ID: 24884407
Provide
uname -a
HBA card details

***************
Have you performed boot -r ?
If not pls do so.

then
Cfgadm -c configure c4
cfgadm -c configure c5

reboot -r

cfgadm -al

# devfsadm -c tape

Insert the tape into the slot and test whether it can work
# mt -f /dev/rmt/1 stat
0

Featured Post

ScreenConnect 6.0 Free Trial

Want empowering updates? You're in the right place! Discover new features in ScreenConnect 6.0, based on partner feedback, to keep you business operating smoothly and optimally (the way it should be). Explore all of the extras and enhancements for yourself!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
AIX 6.1: need to grow single SAN disk rootvg, does this require a downtime? 11 51
how to check for shares on aix 1 80
AIX 5.x set up arrow to recall 11 53
aix unix tar error 3 66
Installing FreeBSD… FreeBSD is a darling of an operating system. The stability and usability make it a clear choice for servers and desktops (for the cunning). Savvy?  The Ports collection makes available every popular FOSS application and packag…
I promised to write further about my project, and here I am.  First, I needed to setup the Primary Server.  You can read how in this article: Setup FreeBSD Server with full HDD encryption (http://www.experts-exchange.com/OS/Unix/BSD/FreeBSD/A_3660-S…
Learn several ways to interact with files and get file information from the bash shell. ls lists the contents of a directory: Using the -a flag displays hidden files: Using the -l flag formats the output in a long list: The file command gives us mor…
Learn how to navigate the file tree with the shell. Use pwd to print the current working directory: Use ls to list a directory's contents: Use cd to change to a new directory: Use wildcards instead of typing out long directory names: Use ../ to move…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question