Solved

Error during system rebuild

Posted on 2009-07-04
3
409 Views
Last Modified: 2013-11-14
New Motherboard, new SATA HD, Processor & RAM. Reloading WIN XP Home on new SATA 160 GB HD and right after boot from disk, it is installing drivers and:

File atapi.sys encountered an unexpected error (8192) at Line 3514 in d:\xpclient\base\boot\setup\setup.c.

New board is an Asus P4S800D-X with a new 160 GB drive connected to the primary SATA slot. No other Hard drives connected at this time.

Please advise!

Thanks Much! Happy 4Th.
0
Comment
Question by:RKoons
3 Comments
 
LVL 31

Expert Comment

by:Frosty555
ID: 24778754
This is usually a symptom of a corrupted or otherwise unreadable installation disc.

Make sure of the following:

1) Your CD/DVD drive is in good working order
2) You are booting off a clean unscratched regular CD or DVD, and it is NOT a cd-rw or a dvd dual layer. Reburn it if you are.
3) Your installation is not corrupted or missing files (e.g. it works on another system)

... and, just for the sake of things, make sure your motherboard's bios is updated to the latest. There's a slim chance that it's the large hard drive making your system choke and a bios update will fix it.
0
 
LVL 92

Expert Comment

by:nobus
ID: 24779046
it looks like a bad file on your cd; you can try to clean the cd, or lens with a cleaner kit
check also your bios settings, if they are set to Sata, or compatible !
0
 
LVL 1

Accepted Solution

by:
RKoons earned 0 total points
ID: 24784857
Unfortunatly, this is one of those issues where I may have solved the issue myself.
I did find out that a separate SATA driver added through the F6 option during setup was required. However, if one forgets that, it says to the user that a hard drive was not found later in the installation and gives you the ol F3 exit option, not an error.
Thankfully, I never say the error again and my new installation has now moved on to other issues.
Thanks anyway for the effort!
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Migration of Exchange mailbox can be done with the ExProfre.exe tool. But at times, when the ExProfre.exe tool migrates the Exchange Server user profile, it results in numerous synchronization problems. Synchronization error messages appear in the e…
If you don't know how to downgrade, my instructions below should be helpful.
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

791 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question