• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 1207
  • Last Modified:

FWSM and OSPF routing

I'm new to firewalls but have an FWSM configured (Visio and config attached). I would like to code OSPF between the FWSM and my internal network and wanted to make sure that this is doable from the FWSM viewpoint. Also, I would like to have the 'vendoroutside' connection be redistributed into my ospf so that i can route to a different firewall if their link goes down. They own the router within our network and they would install a 2nd router in one of our remote offices. Can you tell me if this will also work? Would they be able to use OSPF or would we need to use BGP?
Thanks for any help you can give (and forgive my ignorance)
1 Solution
I have no hands on experience with FWSM, but it is supposed to be based on PIX/ASA software and you can definitely do this with PIX/ASA.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

Featured Post

Get expert help—faster!

Need expert help—fast? Use the Help Bell for personalized assistance getting answers to your important questions.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now