Solved

upgrading from Cisco 3640- 3825

Posted on 2009-07-07
2
755 Views
Last Modified: 2012-05-07
am trying to upgrade from a Cisco 3640 to a Cisco 3825 using the same cards.  Once the cards were installed . It doesnt seem to be seeing  a serial interface  . I am using a CISCO WIC-1DSU-T1, this is the first 3825 I have ever configured so I might be missing something easy, I am not sure if the hardware is compatible? I will include the show diag.

Slot 0:
        C3825 Mother board 1GE(TX,SFP),1GE(TX), integrated VPN and 4W Port adapt
er, 2 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        Onboard VPN             : FW ver01100200
        EEPROM contents at hardware discovery:
        PCB Serial Number        : FOC11104WPX
        Hardware Revision        : 1.1
        Top Assy. Part Number    : 800-23087-03
        Board Revision           : A0
        Deviation Number         : 88343
        Fab Version              : 07
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Processor type           : 61
        Hardware date code       : 20070316
        Chassis Serial Number    : FTX
        Chassis MAC Address      : 0
        MAC Address block size   : 32
        CLEI Code                : IPMEY10BRA
        Product (FRU) Number     : CISCO3825
        Part Number              : 73-4021-08
        Version Identifier       : V03
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF C1 8B 46 4F 43 31 31 31 30 34 57 50 58 40
          0x10: 04 2A 41 01 01 C0 46 03 20 00 5A 2F 03 42 41 30
          0x20: 88 00 01 59 17 02 07 03 00 81 00 00 00 00 04 00
          0x30: 09 61 83 01 32 3F AC C2 8B 46 54 58 31 31 31 33
          0x40: 41 31 34 41 C3 06 00 1B 53 70 4A 20 43 00 20 C6
          0x50: 8A 49 50 4D 45 59 31 30 42 52 41 CB 89 43 49 53
          0x60: 43 4F 33 38 32 35 82 49 0F B5 08 89 56 30 33 20
          0x70: D9 02 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF

        PVDM Slot 0:
        64-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
        Hardware Revision        : 4.0
        Part Number              : 73-8541-05
        Board Revision           : B0
        Deviation Number         : 0
        Fab Version              : 04
        PCB Serial Number        : FO
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Processor type           : 00
        Product (FRU) Number     : PVDM2-64
        Version Identifier       : V01
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 03 EC 41 04 00 82 49 21 5D 05 42 42 30
          0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 31 31 31
          0x20: 33 41 31 35 03 00 81 00 00 00 00 04 00 09 00 CB
          0x30: 88 50 56 44 4D 32 2D 36 34 89 56 30 31 20 D9 02
          0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Slot 1:
        Voice NM-HD-2V (1 on-board DSP) Port adapter
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision        : 5.3
        Top Assy. Part Number    : 800-21591-02
        Board Revision           : A0
        Deviation Number         : 0-0
        Fab Version              : 03
        PCB Serial Number        : FOC
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Product (FRU) Number     : NM-HD-2V
        Version Identifier       : V01
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 03 9B 41 05 03 C0 46 03 20 00 54 57 02
          0x10: 42 41 30 80 00 00 00 00 02 03 C1 8B 46 4F 43 31
          0x20: 30 34 35 30 4B 4E 31 03 00 81 00 00 00 00 04 00
          0x30: CB 88 4E 4D 2D 48 44 2D 32 56 89 56 30 31 20 FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

Slot 2:
        NM-1FE2W Port adapter, 1 port
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware Revision        : 1.0
        Top Assy. Part Number    : 800-04796-01
        Board Revision           : E1
        Deviation Number         : 0-0
        Fab Version              : 04
        PCB Serial Number        : JAB
        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Product (FRU) Number     : NM-1FE2W=
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 00 D7 41 01 00 C0 46 03 20 00 12 BC 01
          0x10: 42 45 31 80 00 00 00 00 02 04 C1 8B 4A 41 42 30
          0x20: 34 33 34 30 31 44 59 03 00 81 00 00 00 00 04 00
          0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

        WIC Slot 0:
        FT1 BT8360
        WIC module not supported/disabled in this slot
        Hardware revision 1.3           Board revision C0
        Serial number     19984154      Part number    800-03279-03
        FRU Part Number     WIC-1DSU-T1=
        Test history      0x0           RMA number     00-00-00
        Connector type    Wan Module
        EEPROM format version 2
        EEPROM contents (hex):
          0x20: 02 11 01 03 01 30 EF 1A 50 0C CF 03 00 00 00 00
          0x30: 60 00 00 00 11 07 06 01 FF FF FF FF FF FF FF FF

0
Comment
Question by:Troma76
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 3

Accepted Solution

by:
bmeyer1908 earned 125 total points
ID: 24797336
You probably need a wic 1 version 2.  I believe the 3640 uses a version 1 wic.  The wic will show up with no configuration after power up if it is the correct version.  Notice that the wic is not supported in wic slot 0.
0
 

Author Comment

by:Troma76
ID: 24797511
yeah that is what i thought but i was hoping i was wrong
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

724 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question