Solved

Backup Exec. 12

Posted on 2009-07-07
1
293 Views
Last Modified: 2012-05-07
We creating a new server (physical server) on our network which is supposed to replace our old Backup Exec. server and I wanted to know IF theres a way, or best way, to save the settings from our old server and place them into effect in our new server?
0
Comment
Question by:OCwaste2
1 Comment
 
LVL 6

Accepted Solution

by:
eabeukes earned 500 total points
ID: 24821139
Best bet would be to follow the instructions in http://support.microsoft.com/kb/909095 otherwise look at http://seer.entsupport.symantec.com/docs/280710.htm - BE10 but the procedure is bvery similar.
0

Featured Post

Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Operating an LTO on a W7 workstation 2 60
Full Backup software for Linux 5 71
Microsoft backup on Server 2012 R Standard server 9 62
how to copy from computer to usb drive 7 124
We planned to use NetApp's SnapManager for Exchange (SME) to make three snapshots a day for quick recovery. Additional we planned to use Symantec NetBackup7 to backup to tape media for disaster recovery. We followed the best practice guide from NetA…
Replication has always been one of those technologies that people run scared from. The main reason is usually cost. When you think of replication, your mind drifts to solutions that replicate from one disk frame to another using block level technolo…
To efficiently enable the rotation of USB drives for backups, storage pools need to be created. This way no matter which USB drive is installed, the backups will successfully write without any administrative intervention. Multiple USB devices need t…
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question