zfs avs repilcation

Posted on 2009-07-08
Last Modified: 2013-12-27
I been trying to setup two zfs servers one as a live and one as a live mirror but have been unable to tell it to mirror keep comming back cant no open /dev/rdsk/c2d0s1?

sndradm -e localhost  /dev/rdsk/c2d0s1 /dev/rdsk/c2d0s0 server1 /dev/rdsk/c2s0s1 /dev/rdisk/c2s0s1 ip sync

Question by:03671328
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
LVL 38

Expert Comment

ID: 24809968
Check your disk device name carefully to make sure it is correct, for Solaris (Sparc) the device name is likely looks like: cXtXdXSX for Solaris x86, some of them looks like cXdXSX
use format command to find out the disk names and partition informations (verify only), or have a look at you /etc/vfstab file.
also have a look at the example in:

Author Comment

ID: 24817448
that's the guide i was fallowing i cant figure out why its not working.
LVL 38

Expert Comment

ID: 24820124
Did you check the disk device names on your system as I mentioned in my previous comment.

Author Comment

ID: 24823360
yea I did.
ls /dev/rdsk/
c1d0s1 c1d0s0 c1d0s3 c1d0s4
c2d0s1 c2d0s0 c2d0s3 c2d0s4

Accepted Solution

03671328 earned 0 total points
ID: 25452028
gave up went to freebsd with zfs.

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Hello fellow BSD lovers, I've created a patch process for patching openjdk6 for BSD (FreeBSD specifically), although I tried to keep all BSD versions in mind when creating my patch. Welcome to OpenJDK6 on BSD First let me start with a little …
This tech tip describes how to install the Solaris Operating System from a tape backup that was created using the Solaris flash archive utility. I have used this procedure on the Solaris 8 and 9 OS, and it shoudl also work well on the Solaris 10 rel…
This video shows how to set up a shell script to accept a positional parameter when called, pass that to a SQL script, accept the output from the statement back and then manipulate it in the Shell.
In a previous video, we went over how to export a DynamoDB table into Amazon S3.  In this video, we show how to load the export from S3 into a DynamoDB table.

710 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question