Solved

Juniper nat vpn to Sonicwall

Posted on 2009-07-08
1
1,231 Views
Last Modified: 2013-11-16
i have a juniper ssg140 and trying to setup a site-site vpn with a sonicwall pro. We have overlapping subnet so we need to configure NAT. Example:
Juniper side is 192.168.1.x with current remote office at 192.168.2.x
Sonicwall side is 192.168.2.x as well.
Want to translate the Sonicwall side using 172.16.1.x. So juniper proxy id has localip: 192.168.1.x, remoteip: 172.16.1.x. Policies match this as well.
Have proposals & ip's matching, but have questions on:
1)the proxy id on the juniper, i don't know what it has to match on the sonicwall
2)what to the policies on the sonicwall have to be
3)what does the local & remote Ike on sonicwall have to match on the juniper
4)I read that the 'Name' of the SA on the sonicwall has to match the 'local id' on the juniper, true?
thanks



0
Comment
Question by:dguillen
1 Comment
 
LVL 1

Accepted Solution

by:
dguillen earned 0 total points
ID: 24817993
figured it out. important parts are localid on juniper=sa name on sonicwall, proxy id on juniper=netowrk policy on sonicwall. important that policies and networks are setup properly
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question