Solved

Cisco Aironet 1200

Posted on 2009-07-09
3
1,508 Views
Last Modified: 2012-05-07
Hi,
I'm trying to setup one of my cisco 1231's as a repeater, I believe I have set the right config on the repeater but it keeps erroring saying

"Interface Dot11Radio0, cannot associate: Not specified parent (from 0017.59f0.4fe1)"

I can only see an option on the repeater to specify it's parents, Am I missing a trick and need to do something on the normal access point, the parent to tell it to authorise the repeater?

Regards,

Gareth
0
Comment
Question by:AshridgeTechServices
3 Comments
 
LVL 25

Accepted Solution

by:
Cyclops3590 earned 500 total points
ID: 24901051
i never actually specified a parent mac to get mine working.  been a while since I did mine but I should be able to help you out.

the main things I can remember is having to set the desired ssid as the infrastructure ssid on the main AP under the Security -> SSID Manager menu option.  then set the radio interface on the repeater AP as a repeater.    I can't remember if I actually had to add the desired ssid onto the repeater AP though as I see it in my config from the cli, but not in the GUI.  

if that doesn't work, please post a sanitized config from the main AP and one of the repeaters (as file attachment please so post doesn't get extremely long, thx)
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There are many useful and sometimes not well documented or forgotten IOS or ASA/PIX commands. See IPE article here , there was also one on PacketU and on Cisco Tips & Tricks. Below are my favorites. I give also a few most often used for Cisco IPS an…
Exchange server is not supported in any cloud-hosted platform (other than Azure with Azure Premium Storage).
This demo shows you how to set up the containerized NetScaler CPX with NetScaler Management and Analytics System in a non-routable Mesos/Marathon environment for use with Micro-Services applications.
When you create an app prototype with Adobe XD, you can insert system screens -- sharing or Control Center, for example -- with just a few clicks. This video shows you how. You can take the full course on Experts Exchange at http://bit.ly/XDcourse.

914 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now