Still celebrating National IT Professionals Day with 3 months of free Premium Membership. Use Code ITDAY17

x
?
Solved

Broke HP NIC Teaming - now RDP and ICA traffic is refused

Posted on 2009-07-09
1
Medium Priority
?
970 Views
Last Modified: 2012-05-07
I have a HP NIC Team set up on my HP DL360 Citrix server.  One of my NIC's was reporting 10 MB half duplex and the other was reporting 1000 MB Full Duplex.  So I decided to break the Team and run on the Gigabit NIC only.  I realize that the switch port might be hardcoded for 10 MB half as well but I haven't checked that yet.  Anyway, I deleted the DNS and WINS records for that server and rebooted it.  I wanted it to repopulate DNS and WINS with the new MAC.  DNS and WINS have repopulated fine but I still can't RDP or connect via a ICA session.  So I did a netstat -a and noticed that it wasn't even listening to RDP or ICA.  So I went into Terminal Services Configuration and both RDP and ICA connections were disabled due to network adapter settings changed.  So I reenabled them but the setting won't stay.  Any idea what to try next?
0
Comment
Question by:CMHA-admins
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 

Accepted Solution

by:
CMHA-admins earned 0 total points
ID: 24815486
I fixed the issue.  I deleted the RDP and ICA connections in Terminal Services Configuration and recreated them.  I also fixed the hardcoded ports on the switch to both be Auto and Full Duplex.  Works like a charm.  I guess that I get the 500 points since I fixed it myself ;-)
0

Featured Post

Free learning courses: Active Directory Deep Dive

Get a firm grasp on your IT environment when you learn Active Directory best practices with Veeam! Watch all, or choose any amount, of this three-part webinar series to improve your skills. From the basics to virtualization and backup, we got you covered.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
During and after that shift to cloud, one area that still poses a struggle for many organizations is what to do with their department file shares.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

704 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question