Solved

ASA 5505 VPN lost gateway?

Posted on 2009-07-09
3
291 Views
Last Modified: 2012-05-07
Hello -
So I cannot ping my VPN public IP any longer.  ISP carrier saying the IP is up and all good on their side.  I asked users to look at ASA, it is powered with a link light LET green on ASA and on switch also.  Not sure what happened.  No changes were made.  Looks like I have to go to the location and connect to the device locally.

Is it possibly the ASA just dropped its gateway in configuration?  It was working since March this year.  What else could of happen?
Thanks.
0
Comment
Question by:mmcsadmin
  • 2
3 Comments
 

Accepted Solution

by:
mmcsadmin earned 0 total points
ID: 24815609
Never mind.  The port was blocked at another location.
0
 
LVL 33

Expert Comment

by:MikeKane
ID: 24815612
I doubt the ASA would magically loose its gateway in the config.  

Some options off the top of my head...

1) reload the ASA.  IF changes were made but not written to memory, the ASA should load the last good code from mem at bootup.
2) Do you have dail-in access to any device behind the ASA like a router or something?   You could telnet into the ASA from inside..
0
 

Author Comment

by:mmcsadmin
ID: 24815626
port was blocked
0

Featured Post

Highfive + Dolby Voice = No More Audio Complaints!

Poor audio quality is one of the top reasons people don’t use video conferencing. Get the crispest, clearest audio powered by Dolby Voice in every meeting. Highfive and Dolby Voice deliver the best video conferencing and audio experience for every meeting and every room.

Join & Write a Comment

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
Meet the world's only “Transparent Cloud™” from Superb Internet Corporation. Now, you can experience firsthand a cloud platform that consistently outperforms Amazon Web Services (AWS), IBM’s Softlayer, and Microsoft’s Azure when it comes to CPU and …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

7 Experts available now in Live!

Get 1:1 Help Now