Solved

Error after trying to print oracle reports on Xerox WorkCentre 5030 PCL6 printer

Posted on 2009-07-09
4
1,248 Views
Last Modified: 2012-08-14
We have this application that we set up printers to it and users shall choose printer to print oracle reports. But all of a sudden one of the printers stopped working and got this error:

PCL XL ERROR
Error: missingAttribute
Operator: BeginPage
Position: 3

But for our other printers, it's working fine just for this one.

Please advise. THanks!
0
Comment
Question by:kirtaps
  • 2
4 Comments
 
LVL 54

Accepted Solution

by:
b0lsc0tt earned 500 total points
ID: 24829442
My first suggestion would be to install the PCL 5 or PCL5e driver for that printer.  The printer usually has one for the version of PCL available.  Unless you have some specific need for PCL 6 you won't notice a difference and PCL 6 can be a little more quirky with some apps, etc.

Let me know if you have a question about this.

b0lsc0tt
0
 

Author Comment

by:kirtaps
ID: 24874619
Actually it worked however the print on both side function is not there anymore/.
0
 
LVL 54

Expert Comment

by:b0lsc0tt
ID: 24875574
I am glad it is working now.  To get the function back you probably just need to go into the Printers folder, bring up the Properties for that printer, go to the Device Settins tab (or one similar) and select the option that shows to enable duplexing.  Depending on the printer this could be done by showing a "duplexing unit" is installed.  Let me know if you have a question about any of this but it could be hard for me to be specific without that exact printer (or screenshots of what you see).
Otherwise the issue could be driver related.  Did you install the drivers for that exact printer and your computer's operating system?  Hopefully the issue is the easier cause above. :)
bol
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Causes of paper jams:The following are the main causes of paper jams. Guides:If the guides for the paper are not set correctly they may cause the paper to enter at an angle. You should ensure that the guides are set correctly for the paper type a…
When I recently replaced my image transfer kit on my office HP color laserjet 5550dn printer, I had a slight problem.  The left bracket that holds the transfer kit got stuck in the upright locked position instead of being at a 45 degree angle facing…
With Secure Portal Encryption, the recipient is sent a link to their email address directing them to the email laundry delivery page. From there, the recipient will be required to enter a user name and password to enter the page. Once the recipient …
In an interesting question (https://www.experts-exchange.com/questions/29008360/) here at Experts Exchange, a member asked how to split a single image into multiple images. The primary usage for this is to place many photographs on a flatbed scanner…

679 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question