Solved

WebSense Express with multiple Cisco 3500 switches

Posted on 2009-07-13
1
417 Views
Last Modified: 2012-05-07
I have multiple Cisco 3500 swtiches in my network environment, and I recently purchased WebSense Express to URL filter our environment.

Does anyone have the correct commands to setup a Cisco 3548, 3512, 3524 for port monitoring so that the WebSense Express can "see" the traffic on the network?

WebSense is setup on my 3524 on port 14, my ASA 5500 is two switches away from Websense on the 3524.  The 3524 connects to a 3512 via a GBIC GigE interface, and from the 3512, the 3512 uses a second GBIC GigE interface to connect up to the 3548.

I know the command on the 3524 for WebSense should be
3524>conf t
3524>int fast 0/14
3524>port monitoring

But that still does not see the traffic.  What are the other things I need to setup on the Cisco switches to handle this?

Thank you,

Jeff
0
Comment
Question by:jgrammer42
1 Comment
 

Accepted Solution

by:
jgrammer42 earned 0 total points
ID: 24917917
need to close...no one capable of answering.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

One of the Top 10  common Cisco VPN problems are not-matching shared keys. This is an easy one to fix, but not always easy to notice, see the case below. A simple IPsec tunnel between fast Ethernet interfaces of routers SW1 (f1/1) and R1(f0/0). …
Overview Often, we set up VPN appliances where the connected clients are on a separate subnet and the company will have alternate internet connections and do not use this particular device as the gateway for certain servers or clients. In this case…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

932 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now