Solved

hyper-v physcial 2 virtual job failing

Posted on 2009-07-13
6
721 Views
Last Modified: 2013-11-06
I have a brand new hyper-v / scvmm install and have yet to get a virtual server up and running with it.  I believe that my Hyper-V Host and SCVMM servers are setup/running properly.

Hyper-V server: 2008 Server Data Center Edition core install
scvmm server: 2008 Server std edition
Server being converted: 2003 R2 Server

During the P2V conversion I get the following error in my scvmm job logs:

"Error (3154)
An internal error has occurred trying to contact an agent on the hornet server.
 (Internal error code: 0x8099319E)

Recommended Action
Ensure the agent is installed and running. Ensure the WMI service is installed and running, then restart the agent."

it seems as if this is occuring during step 1.3 'Copy Hard Disk' step

both the WMI service and VMM P2V Agent service are running on the server.
0
Comment
Question by:xguitox
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
6 Comments
 
LVL 10

Expert Comment

by:Datedman
ID: 24840573
I like to convert using Symantec Backup Exec System Recovery but it's a bit pricey...might want to run VMMCA I see MS recommends you run it if having trouble with P2V:
http://www.microsoft.com/downloads/details.aspx?FamilyID=ae7c6a09-e8df-4adc-8686-f4d140a3a3f4&displaylang=en 
0
 

Author Comment

by:xguitox
ID: 24840817
I ran the configuration analyzer before installing the scvmm. it said all systems were go. i think it was only designed to help with pre-reqs for the scvmm install and will not help me in this situation.
0
 
LVL 15

Expert Comment

by:plimpias
ID: 24846234
Hi, if doing an offline conversion it sounds like your nic card drivers that you are using are not support. If you noticed the server will restart in the command prompt and eventually time out. What you can do is run ipconfig and see if it created an ip address. If it doesn't than you need to import a updated nic card driver on the Driver folder.
0
NEW Veeam Agent for Microsoft Windows

Backup and recover physical and cloud-based servers and workstations, as well as endpoint devices that belong to remote users. Avoid downtime and data loss quickly and easily for Windows-based physical or public cloud-based workloads!

 

Author Comment

by:xguitox
ID: 24848566
this is not an offline conversion
0
 

Accepted Solution

by:
xguitox earned 0 total points
ID: 24848584
I actually found a solution.
I disabled all non-essential services and applications (backup exec, IIS, fileway, spiceworks and AD manager plus, etc)
restarted the job and it completed successfully.
thanks everyone for the responses.
0
 
LVL 15

Expert Comment

by:plimpias
ID: 24849582
By the way it is best to do an offline conversion, especially if your are running any database services like SQL, ad, exchange, blah blah blah. Just a heads up
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Moving a windows 7 install to new hardware 9 171
SonicWall blocking access to MS RDP RemoteApp 24 73
DNS/WINS in a domain 10 84
remote desktop user rights 5 92
ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
This article explains how to install and use the NTBackup utility that comes with Windows Server.
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…

742 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question