Solved

SSG5 server host gateway address

Posted on 2009-07-13
2
484 Views
Last Modified: 2012-06-21
I wanted to make sure I have the IPs correct for my setup. Background first:

interface 0/0 public 1.1.1.1 (This IP from public block assigned to me) Untrust Zone Route Mode
interface 0/0 gateway 1.1.1.2 (This gateway IP from ISP)
interface 0/1, 0/2 in bgroup0.
bgroup0 IP is 10.0.0.1/24 Route Mode


Server 1 and 2 in the Trust Zone
Server 1 IP 10.0.0.2 - 10.0.0.6
Server 2 IP 10.0.0.7 - 10.0.0.11

Question is what Gateway IP should I use when configuring the TCP/IP settings on each server?
10.0.0.1 (The bgroup0 IP)
1.1.1.1 (The public IP used for the 0/0 interface)
1.1.1.2 (The public gateway IP from the ISP used in the 0/0 interface)

Thanks
0
Comment
Question by:wn411
2 Comments
 
LVL 25

Accepted Solution

by:
Ron Malmstead earned 500 total points
ID: 24843956
The gateway on the server, should be the internal IP address of the Juniper firewall....in your case it appears to be ... 10.0.0.1

0
 

Author Closing Comment

by:wn411
ID: 31602923
Thanks for quick answer!! :)
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Let’s list some of the technologies that enable smooth teleworking. 
Meet the world's only “Transparent Cloud™” from Superb Internet Corporation. Now, you can experience firsthand a cloud platform that consistently outperforms Amazon Web Services (AWS), IBM’s Softlayer, and Microsoft’s Azure when it comes to CPU and …
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

803 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question