Solved

Multiple 3 static IP's and two web servers

Posted on 2009-07-14
3
298 Views
Last Modified: 2013-12-20
I have just leased a set of 5 static IP's to configure into my network.. here was my previous setup:

WEB-->FIREWALL-->PORT80 FORWARD-->OCTAGATE REVERSE PROXY-->web1 or web2

the proxy would point to the correct web server depending on the HTTP header.. the problem was the proxy had to handle ALL requests. so i purchased the IP's to correct this.. only now im stuck here:

WEB-->FIREWALL-->web1 or web2

It's simply not working, i have a range of IP's: X.X.X.226 - X.X.X.230

226 is the firewall, 227, 228, 229, 230 are alias IP's

the setup:
Firewall: IPCop, IPFire and Smoothwall, no luck on any (willing to use any of the three)

I have read that this would work if I were forwarding alias IP's to servers in the DMZ only my servers are 1U's w/only 1 onboard NIC and 1 PCI NIC.. this leaves no room to setup a DMZ
any ideas???
here was the original idea that apparently doesnt work..
 
EXTERNAL--PORT-->INTERNAL
x.x.x.230 --80--> x.x.x.30
x.x.x.230 --53--> x.x.x.30 (TCP and UDP)
x.x.x.230 --22--> x.x.x.30
x.x.x.230 --143--> x.x.x.30
x.x.x.230 --110--> x.x.x.30
x.x.x.230 --25--> x.x.x.30
 
x.x.x.229 --80--> x.x.x.29
x.x.x.229 --53--> x.x.x.29 (TCP and UDP)
x.x.x.229 --22--> x.x.x.29
x.x.x.229 --143--> x.x.x.29
x.x.x.229 --110--> x.x.x.29
x.x.x.229 --25--> x.x.x.29

Open in new window

0
Comment
Question by:p3rlphr33k
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
3 Comments
 

Author Comment

by:p3rlphr33k
ID: 24847043
to add to the pressure of the situation.. each server is a virtual host. sry i forgot to mention
0
 

Author Comment

by:p3rlphr33k
ID: 24847765
nevermind i figured it out..
0
 

Accepted Solution

by:
p3rlphr33k earned 0 total points
ID: 24847766
thanks for all your help i dont think i will be keeping this account
0

Featured Post

Free NetCrunch network monitor licenses!

Only on Experts-Exchange: Sign-up for a free-trial and we'll send you your permanent license!

Here is what you get: 30 Nodes | Unlimited Sensors | No Time Restrictions | Absolutely FREE!

Act now. This offer ends July 14, 2017.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a collection of issues that people face from time to time and possible solutions to those issues. I hope you enjoy reading it.
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
NetCrunch network monitor is a highly extensive platform for network monitoring and alert generation. In this video you'll see a live demo of NetCrunch with most notable features explained in a walk-through manner. You'll also get to know the philos…

724 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question