Netgear ReadyNAS iSCSI loosing user connections

I have NAS 2100 4TB and have created a 500GB iSCSI drive.

Since yesterday my users have been loosing their connection to the iSCSI drive.

Here are the System Event Log entries:

iScsiPrt
Event ID: 34
A connection to the target was lost, but Initiator successfully reconnected to the target. Dump data contains the target name.


PlugPlayManager
Event ID: 12
The device 'IET      VIRTUAL-DISK     SCSI Disk Device' (SCSI\Disk&Ven_IET_____&Prod_VIRTUAL-DISK____&Rev_0___\1&2afd7d61&0&000000)
disappeared from the system without first being prepared for removal.

Ftdisk
Event ID: 57
The system failed to flush data to the transaction log. Corruption may occur.

Ntfs
Event ID: 50
{Delayed Write Failed} Windows was unable to save all the data for the file . The data has been lost.
This error may be caused by a failure of your computer hardware or network connection.
Please try to save this file elsewhere.


Disk
Event ID: 51
An error was detected on device \Device\Harddisk3 during a paging operation.

iScsiPrt
Event ID: 1
Initiator failed to connect to the target. Target IP address and TCP Port number are given in dump data.

iScsiPrt
Event ID: 7
The initiator could not send an iSCSI PDU. Error status is given in the dump data.

iScsiPrt
Event ID: 20
Connection to the target was lost. The initiator will attempt to retry the connection.

I tested and installed this system just last week.

Thanks,

Jim
Jim WellsSr. IT AdminAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

ComputerTechieCommented:
Check your connections change the cables if needed.
I would run a diagnose on the drives.

CT
0
Jim WellsSr. IT AdminAuthor Commented:
Problem appears to be solved.
A laptop with the same address as the NAS was plugged into the network.  

I guess the error message was disregarded...geez what do we do?

Thanks for the response

0
ComputerTechieCommented:
I got fixed that issues with fixing ip address on small networks.

CT
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Windows Networking

From novice to tech pro — start learning today.