VRF Config Examples

Posted on 2009-07-14
Last Modified: 2012-05-07
I have recently been charged with configuring a small network to support LANS with overlapping IP netblocks ( back to another network. I have concluded that I will need to use VRF to accommodate the overlapping subnets, just never configured VRF. I am using a Cisco 3750 to connect the LANS to a WAN connection. I believe this hardware will work. If not, let me know..Your expert answers are greatly appreciated........
Question by:marktex
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2

Accepted Solution

602650528 earned 500 total points
ID: 24857499
Sure, you can implement this with vrf-lite. See

hope this helps.

Author Closing Comment

ID: 31603322
Sorry for the delay getting back. Everything is working via VRF Lite...Thanks again for the quick replay and answer....

Expert Comment

ID: 24965457
nice !

Expert Comment

ID: 37631388
very nice my problem is solved thanks a lot

Featured Post

Flexible connectivity for any environment

The KE6900 series can extend and deploy computers with high definition displays across multiple stations in a variety of applications that suit any environment. Expand computer use to stations across multiple rooms with dynamic access.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (, I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
Suggested Courses
Course of the Month4 days, 13 hours left to enroll

635 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question