Solved

2811 vs 2611xm 12.4T advancedenter

Posted on 2009-07-14
1
558 Views
Last Modified: 2012-05-07
If I'm running the same image on both, what is the advantage for using the 2811 (besides higher throughput). What functionality differences are there between the 2811 and 2611xm running a 12.4T advanced enterprise?
0
Comment
Question by:WERAracer
1 Comment
 
LVL 4

Accepted Solution

by:
khyer123 earned 500 total points
ID: 24854981
the 2811 is an integrated services router - not only is it significanlyt faster as you mentioned, but also includes extras like onboard SDM capabilities (without having to install it yourself), firewall features, call manager express, VPN, wireless capabilities, and SRST (survivable remote site telephony). I believe all of those need to be installed separately onto the 2611, or require additional extensions
0

Featured Post

How to improve team productivity

Quip adds documents, spreadsheets, and tasklists to your Slack experience
- Elevate ideas to Quip docs
- Share Quip docs in Slack
- Get notified of changes to your docs
- Available on iOS/Android/Desktop/Web
- Online/Offline

Join & Write a Comment

Suggested Solutions

While it is possible to put two routes in place with the secondary having a higher metric, this may not always work. In the event of a failure that does not bring down the physical interface on the router the primary route is not removed. There is a…
Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now