Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

Port Forwarding with Vista (ultimate) ICS

Posted on 2009-07-14
3
523 Views
Last Modified: 2013-11-09
I have an interesting scenario.

Laptop with Vista Ultimate SP2. It has a AT&T 3G data device that is an USB interface. Looks like a thumbdrive. i am stuck with this for my only internet access for this laptop. I get a nice public IP from AT&T when connected; internet access is fine.

I have an IP based camera (192.168.0.30) plugged in via a cross over ethernet cable to the laptops NIC (192.168.0.1)

I have enabled ICS in hopes that i can do some kind of port forwarding like every other cheap router out there can do. I can browse to the camera's web page on the laptop via http://192.168.0.30. i would like to remotely from the internet browse to the ip address provided by AT&T 3G Cell Data network via HTTP and have it display the camera's web interface. if this was a normal router; it would be easy as port forwarding is very easy. I even went into the ICS settings button and enabled the "Web Services (HTTP" thinking this was port forwarding. It does appear so looking at netstat output.

I can not seem to find a way to accomplish this with windows. I have done extensive searching on windows vista, ICS, & port forwarding.

any know of any way to do this with windows vista? Maybe some sort of NetSh command? or edge transversal for inbound rules that is in the advanced firewall windows on vista?
0
Comment
Question by:admincbba
  • 2
3 Comments
 
LVL 3

Accepted Solution

by:
Pierellie earned 500 total points
ID: 24855154
maybe if you bridge the the nic and at&t interface's in "Network Connections"? that would atleast setup routing between the two interfaces....
0
 
LVL 1

Author Comment

by:admincbba
ID: 24855240
Ok will do that. Anything else?
0
 
LVL 1

Author Comment

by:admincbba
ID: 24855288
Something else. This is now only remotely accessible. I am using live mesh for remote control. Do u think the bridging could kill off the at&t connection?
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is in response to a question (http://www.experts-exchange.com/Networking/Network_Management/Network_Analysis/Q_28230497.html) here at Experts Exchange. The Original Poster (OP) requires a utility that will accept a list of IP addresses …
Before I go to far, let's explain HA (High Availability) and why you should consider it.  High availability is the mechanism used to provide redundancy to any service at the same site and appears as a single service to the users of that service.  As…
The Task Scheduler is a powerful tool that is built into Windows. It allows you to schedule tasks (actions) on a recurring basis, such as hourly, daily, weekly, monthly, at log on, at startup, on idle, etc. This video Micro Tutorial is a brief intro…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question