Solved

tracert command and viewer

Posted on 2009-07-14
7
356 Views
Last Modified: 2012-05-07
I am looking for a free or l;ess than $50 tool that does the equivalent of a tracert command in Windows.  It must:
1. allow for continuous tracerts to be done to a single IP any number of minutes apart (e.g., every 1 min).  Being able to do multiple separate IPs would be nice as well.
2. Show some decent stats (max, avg, min for each hop; max, avg, min for round trip.
3. Visual graphs of hops is preferred -- Visual Route 2009 is nice but too expensive

Also, in Windows, what the heck do those first three columns of ms mean?  I am guessing max, avg, and min but it would be nice to know and the msft docs don't say.

0
Comment
Question by:harry-you-da-man
7 Comments
 
LVL 12

Expert Comment

by:kevin_u
ID: 24856461
0
 

Author Comment

by:harry-you-da-man
ID: 24856507
Sorry, i specifically mentioned I was not interested in Visual Route -- too expensive.  The freeware version does not suit my needs.
0
 
LVL 5

Expert Comment

by:KETTANEH
ID: 24857198
0
Top 6 Sources for Identifying Threat Actor TTPs

Understanding your enemy is essential. These six sources will help you identify the most popular threat actor tactics, techniques, and procedures (TTPs).

 
LVL 5

Assisted Solution

by:KETTANEH
KETTANEH earned 50 total points
ID: 24857200
0
 
LVL 32

Accepted Solution

by:
Kamran Arshad earned 75 total points
ID: 24857611
You can also check out WinMTR;

winmtr.sourceforge.net
0
 

Author Closing Comment

by:harry-you-da-man
ID: 31603575
Thanks!
0
 

Author Comment

by:harry-you-da-man
ID: 24888199
I likd uetian1707's solution the most for a variety of reasons.  First, the src is there which means I can modify the source and, for example, dump out the last set of tracert values and later graph them myself. I gave this 75 of the 125 pts.

Katteneh -- I gave you 50 of the 125 points -- your link was ip-tracking which was more along the line of whois -- not quite at all like tracert -- but it did lead me the the "Free IP Tools 4.2 from www.tamos.com which I found s bit useful, but not as useful as the sourceforge one.  

Independently, I found something better than both of the above, graphically (and with regard to other features) but no src to tweak.  This is called ccping 1.1 and can be found on www.colasoft.com -- the documentation has a bit of broken English.  This appears to have been developed in China and they did a pretty darn god job.  It's not a tracert -- but you can specify multiple domans -- so if you take your cmd.exe tracert.exe output of  ip addresses, you can graphically see how each one is doing, w/r to pings, at any particular time.  Not at all like the tracert tool which gave you the list of IP addresses in the first place, but still useful.

Thanks
0

Featured Post

How your wiki can always stay up-to-date

Quip doubles as a “living” wiki and a project management tool that evolves with your organization. As you finish projects in Quip, the work remains, easily accessible to all team members, new and old.
- Increase transparency
- Onboard new hires faster
- Access from mobile/offline

Join & Write a Comment

Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

758 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now