Solved

stupid q: I just connected to a server using Cisco VPN Client 5x; but I don't see the server. how do I see and control the server?

Posted on 2009-07-15
6
297 Views
Last Modified: 2012-05-07
hello experts,

I just connected to a server using Cisco VPN Client 5x; but I don't see the server. how do I see and control the server?

I am connected; but see no server... I am confused.
0
Comment
Question by:epifanio67
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
6 Comments
 
LVL 7

Expert Comment

by:clonga13
ID: 24864020
Your using a Cisco VPN client to connect to a server? What server are you connecting to?
0
 

Author Comment

by:epifanio67
ID: 24864127
thx clonga13

correct
Windows2003
0
 
LVL 34

Expert Comment

by:Istvan Kalmar
ID: 24864200
colud you send me the config?
0
Are You Ransomware's Next Victim?

Worried about ransomware attacks hitting your organization?  The good news is that these attacks are predicable and therefore preventable. Learn more about how you can  stop a ransomware attacks before encryption takes place with WatchGuard Total Security!

 

Author Comment

by:epifanio67
ID: 24864254
thx ikalmar....

Not sure if I understand... sorry...

what config?

I installed Cisco VPN Client 5.x
then, I created a connection.
Logged in

Should I not see the server? have full access to it?
thx
0
 

Author Comment

by:epifanio67
ID: 24864749
Hello experts,

Here is my problem, I just received details on how to connect to a lab using Cisco VPN Client 5.x. I am able to connect; but I am not sure what I am connecting to.

The visio diagram of the lab (unfortunately I can not attach), lists a DMZ with a cluster name, several hosts, several IPs and other servers. My understanding is that there is only two physical servers.

so, what am I supposed to see when connected?

thx so much and my apologies for being so vague.

I am hoping one of you can shine a light to either ask smart questions or know what to do....

thx
0
 

Accepted Solution

by:
epifanio67 earned 0 total points
ID: 24869749
I can't believe I did not know this.. it is amazing how you forget things...

you first connect to the network... then you use remote desktop to connect to server...

0

Featured Post

Are You Ransomware's Next Victim?

Worried about ransomware attacks hitting your organization?  The good news is that these attacks are predicable and therefore preventable. Learn more about how you can  stop a ransomware attacks before encryption takes place with WatchGuard Total Security!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Incredibly slow speeds while testing on server in China? 5 83
ASA Tunnel 18 54
Use packet tracer to verify anyconnect VPN 11 137
VPN, Squid-  unable to log https requests 5 105
Like many others, when I created a Windows 2008 RRAS VPN server, I connected via PPTP, and still do, but there are problems that can arise from solely using PPTP.  One particular problem was that the CFO of the company used a Virgin Broadband Wirele…
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

737 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question