[2 days left] What’s wrong with your cloud strategy? Learn why multicloud solutions matter with Nimble Storage.Register Now

x
?
Solved

E10 and E100 connections between two differnet physical sites

Posted on 2009-07-16
5
Medium Priority
?
332 Views
Last Modified: 2012-05-07
Hi

Do this connections mean just use the switch to connect both the sites ?I have a requirement of using same subnet(1.1.1.10 at one site and 1.1.1.11 on another site ) on both the sites that are connected through one these type of connections

Thanks
0
Comment
Question by:alimohammed72
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
5 Comments
 
LVL 7

Expert Comment

by:clonga13
ID: 24870832
How are the sites connected? If there is just the 10 or 100Mb connection and the same subnet, just plug them into a switch and it should work fine. If a router seperates them, then you would have to use different subnets or configure the router for bridging.
0
 

Author Comment

by:alimohammed72
ID: 24870939
I do not have these connections yet,I am trying to get one from the service provider because two sites  are 50kms apart.Does any of you have these type of connectionc ?
0
 
LVL 7

Expert Comment

by:clonga13
ID: 24871245
Are you trying to get a Metro Ethernet connection or something like Frame Relay, Dedicated Internet or MPLS? 50kms is a long way apart.
0
 

Author Comment

by:alimohammed72
ID: 24872632
I am trying to connect two offices . I think they call it LAN EXTENSION...
0
 
LVL 7

Accepted Solution

by:
clonga13 earned 1500 total points
ID: 24872697
If it's a LAN extension then it should just work like a long patch cable between your switches. It should have no problem with the two sides being on the same subnet.
0

Featured Post

Q2 2017 - Latest Malware & Internet Attacks

WatchGuard’s Threat Lab is a group of dedicated threat researchers committed to helping you stay ahead of the bad guys by providing in-depth analysis of the top security threats to your network.  Check out our latest Quarterly Internet Security Report!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
#Citrix #Netscaler #MSSQL #Load Balance
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

656 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question