Dell PERC4 + 220s -- No drives detected by PERC

DanLockwood
DanLockwood used Ask the Experts™
on
I have a PE2650 with PERC4 installed.  The PERC is connected to a PV220s.  The enclosure powers up and all drives spin up.  When I use CTRL+M to configure the PERC, the PERC does not show any physical disks present in the 220s.  When the PERC is scanning the SCSI channels I see it blinking the lights on the disks.  The 220s is in shared bus mode with 14x300Gb drives connected.  Suggestions?
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial